Quick Details

• Color Temperature:

  3,000k

• Voltage:

  9v

• Place of Origin:

  Guangdong, China (Mainland)

• Delivery Time:

  0

• Packing:

  Alumiunum packing,Paper packing,Customized Packing.etc

• OE Experience:

  No

Product Name:HID conversion kit 9005.9006

HID conversion kit 9005.9006

Application

auto

Product Description:

HID conversion kit(H1.H3.H4.H7.H8.H9.H11.H13.9005.9006.etc)
Color:3k to 30k or aboved

 

Main Technical Parameter:

 HID lamp technical parameter:

Power

35W

Input Voltage

9V-16V

Standard Input Current

3.2A

Normal Operating Voltage

80V

Luminous flux

>3000lm

Color temperature

3000K,4300K,5000K,6000K,8000K,10000K,12000K

Lifetime

3000h

Ballast technical parameter:

Standard Input Voltage:   13.2V

Output power:     35W norm.

Voltage Accommodation Range:   9~16V

Electric Efficency:  >85%

Standard Input Current:   3.2A

Maximum Input Current:  8A

Lifetime:   >3000hrs

Momentary Maximum Ignition Voltage:  23KV

Ambient Temperature Range:    -40~+105

Features of Xenon HID convertion kit:

6) HID conversion kit Bulb size:

H1.H3.H4-1.H4-2.H4-3.H4-4. H7.H8.H9.H10.H11.H13-1.H13-2.H13-3.H13-4.

9004-1/9004-2/9004-3/9004-4/9005/9006/9007-1/9007-2/9007-3/9007-4/D2C(D2R/S)/880/881.

7) Color temperature:

3,000K/4,300K/5,000K/6,000K/8,000K/10,000K/12,000K.or above.

We also carry extreme colors, Deep Blue/Purple/Green/Pink/Yellow.

Note: Our fraction defective is lower than 2%. If you purchase 100 sets at a time, 2 sets will be presented free.

Product and Accessories List:

·                       Two Xenon HID Bulbs ( Buyer chooses Bulb type and Color Temperature)

·                       Two Ballasts

·                       Two supports of Ballast

·                       Eight fixation buckles of wire

·                       Two screws

·                       One Operation Instruction

THE PROCESS FOR INSTALLATION:

1.       Separate the headlamps (right&left)from your car after opening your car bonnet,if there is enough space for car bonnet,if there is enoughj space for exchange ,it is not needed to separate the headlamps from your car.

2.       Open the rear cover of the headlamp and pull the installed halogen lamp out.

3.       Drill a hole in the middle if the rear cover of the headlamp with a 21mm hole cutter.

4.       Take out the plastic cap of the HID bulb.

5.       Put the HID lamp into the headlamp unit.

6.       Connecting the wires-referring to the wiring diagram in the guide book.

7.       Close the cap of the headlamp after fitting the rubber barking attached to the bulbs wire into 9 the units cover.

8.       Stick te ballast on the nearest place from the headlamp in the engine room firmly by using double-faced tape,cable tie and etc.

9.       Connect the wire of the ballast with the wire of bulb.

10.    Test whether or not the headlamps work properly.

Zhongshan Sanight Electronic Technology Co., Ltd. is a real factory making HID conversion kits and HID accessories in China. The major products and business of Sanight include HID conversion kits, H1, H3, H7, H11, 9004(HB1), 9005(HB4), 9007(HB5), D2S and D2R, 9004 H/L, 9007 H/L, ...[Read More]

Company Profile:

• Main Product:

  HID conversion kit,HID bulb,HID ballast,HID H/L beam bulb,HID single beam bulb,HID accessories,HID slim ballast,HID,H4

• Business Type:

  Manufacturer

• Current Export Market:

  North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania