Global Auto Parts & Accessories Marketplace
Home » Product Directory » Electricity & Electronics » Lighting System » Hid »

HID conversion kit H4.H7.H8

    • Application: auto
    • Market Type:After Market 
    • FOB Price: Inquiry For It?
    • Payment Terms: , T/T
    • Minimum Order: Negotiable Trial Order

Quick Details

  • Life:


  • Color Temperature:


  • Voltage:


  • Place of Origin:

    Guangdong, China

  • Delivery Time:


  • Packing:

    Alumiunum packing,Paper packing,Customized packing.etc

  • OE Experience:


Product Name:HID conversion kit H4.H7.H8

HID conversion kit H4.H7.H8



Product Description:

HID conversion kit (H1.H3.H4.H7.H8.H9.H11.9005.9006.etc)
Color:3k to 30k or aboved

HID conversion kit detail as follow: 

Main Technical Parameter:

 HID lamp technical parameter:



Input Voltage


Standard Input Current


Normal Operating Voltage


Luminous flux


Color temperature




Ballast technical parameter:

Standard Input Voltage:   13.2V

Output power:     35W norm.

Voltage Accommodation Range:   9~16V

Electric Efficency:  >85%

Standard Input Current:   3.2A

Maximum Input Current:  8A

Lifetime:   >3000hrs

Momentary Maximum Ignition Voltage:  23KV

Ambient Temperature Range:    -40~+105

Features of Xenon HID convertion kit:


Xenon-HID Conversion Kit is a true Plug-and-Play Kit, easy to convert. Our conversion kits fit into your headlight housing perfectly. No modification or retrofitting is required. No need to cut your stock headlight wiring.

1) Fits all vehicles with projector or reflector headlights.

2) Easy to install: Just connect the wiring harness from the stock headlight wiring to the ballast. From the ballast, connect the wiring harness from the ballast to the HID Bulbs. Put the HID Bulb back into your headlight housing and it is completed. Detailed instructions are included in the kit. 

3) Longer lifetime (3000 hours) then traditional halogen bulbs, over 10 times longer on average.

4) Greater luminosity (3200lm) and low power consumption.

5) High safety:

Waterproof, dustproof and vibration resistant ballasts.

open circuit protection, short circuit protection, over voltage and less voltage protection ,bulb abnormity protection and anti-jamming. It can apply to very adverse conditions.

6) Bulb size:

H1.H3.H4-1.H4-2.H4-3.H4-4. H7.H8.H9.H10.H11.H13-1.H13-2.H13-3.H13-4.


7) Color temperature:

3,000K/4,300K/5,000K/6,000K/8,000K/10,000K/12,000K.or above.

We also carry extreme colors, Deep Blue/Purple/Green/Pink/Yellow.

Note: Our fraction defective is lower than 2%. If you purchase 100 sets at a time, 2 sets will be presented free.


Product and Accessories List:

·                       Two Xenon HID Bulbs ( Buyer chooses Bulb type and Color Temperature)

·                       Two Ballasts

·                       Two supports of Ballast

·                       Eight fixation buckles of wire

·                       Two screws

·                       One Operation Instruction


1.       Separate the headlamps (right&left)from your car after opening your car bonnet,if there is enough space for car bonnet,if there is enoughj space for exchange ,it is not needed to separate the headlamps from your car.

2.       Open the rear cover of the headlamp and pull the installed halogen lamp out.

3.       Drill a hole in the middle if the rear cover of the headlamp with a 21mm hole cutter.

4.       Take out the plastic cap of the HID bulb.

5.       Put the HID lamp into the headlamp unit.

6.       Connecting the wires-referring to the wiring diagram in the guide book.

7.       Close the cap of the headlamp after fitting the rubber barking attached to the bulbs wire into 9 the units cover.

8.       Stick te ballast on the nearest place from the headlamp in the engine room firmly by using double-faced tape,cable tie and etc.

9.       Connect the wire of the ballast with the wire of bulb.

10.    Test whether or not the headlamps work properly.


Send your message to this supplier:

logo Ms. Ellen Wang
Enter between 20 to 3,000 characters, English only.

Supplier Details

Zhongshan Sanight Electronic Technology Co., Ltd.

Market Type: After Market 
Business Type: Manufacturer
Main Product: HID conversion kit,HID bulb,HID ballast,HID H/L beam bulb,HID single beam bulb,HID accessories,HID slim ballast,HID,H4
Didn't find what you are looking for?
Please send us Your Search Requirement, or you can Post a Buying Lead,
suppliers may contact you actively.

Send Message