[Nov 13, 2013]
 |
Air operated Pneumatic diaphragm pumps
QBY pumps are available in sizes 1/2" to 4" (12mm to 100mm) with flow rates from 0.8 m3/hour to 50 m3/hour and discharge heads to 60 metres.
The pumps are available in a variety of materials - stainless steel, aluminium, cast iron and polypropylene bodies. Diaphragms, balls and seats are also available in a variety of materials to suit any pumping requirement.
The pumps can be supplied bare or complete with suction and discharge port adaptors as required complete with air control valves and can be mounted within fabricated frames for ease of manoeuvrability on site. |
|---|
[Nov 13, 2013]
|
Portable Oil Pump you’ll get:
Speed – Save time and headache with an insanely fast pump - 10, 15 or 25 gallons per minute!!
Versitility – The pump is self priming, works with cold oil and is portable.
Reliability – Our custom built head an motor are over-built to be a dependable solution for years. We back this up with a 5yr. warranty.
We knew we had a good thing here, but the feedback from our customers suggest we have superior product.
Features:
-Long Lasting Custom Industrial Motor - Thermally protected and now available in 120v and 230v
-Rock Solid and Powerful Cast Iron Pump Head - Self-priming portable close-coupled rotary gear pump handles creamy, hydrogenated, vegetable, motor and other waste oils.
You do not have to baby this pump! If you run waste oils, you’re going to need a strong, reliable pump to collect oil, transfer it around and even fill your vehicle.
Welcome to visit our company and negotiate business. |
|---|
[Nov 13, 2013]
|
Working Data:
Working Principle: Three Screw (One main, two driven screws)
Main applications: Heavy Oil, bitumen
Driver: Electric motor, diesel motor.
Power Specs: 380/415 V 3phase; 50hz/60hz
Max. permissible fluid temperature: 350°C
Type of connection: Flange, Thread, Quick Coupled.
Installation position: Horizontal
Casing/Inner parts material: Cast iron, Stainless Steel/Cast iron, Stainless steel, Bronze
Shaft seal type: Mechanical seal
Free passage: 00 mm
Maximum viscosity: 1000CST
Maximum drive rating: 132 kW (177hp)
Maximum caliber: 6inch (150mm)
Maximum discharge-side pressure: 2.5mpa (25bar)
Flow rate range: 0.6-120 m³/h (10-2010l/m) |
|---|
[Nov 13, 2013]
|
Product Features:
1, high-lift booster.
2, BPB type: can be used for water, salt water, weak acid and a variety of chemical and biological.
3, the BPC: for kerosene, light oil, mechanical oil, and heavy oil. A variety of liquids with a temperature below 150 ° C can also be used.
4, light weight, low noise, and long life.
5, easy maintenance, low cost, simple structure.
6, applied to the hydraulic system, textile machinery, hydraulic energy and lubricants source.
Note: BPC-type for clean brine must have adequate lubrication. |
|---|
[Nov 13, 2013]
|
Overview and purpose:
LQRY Series conducting hot oil pump is drawing on various domestic and international advanced hot oil circulating pump characteristics developed.
The pump has a reasonable structure, advanced technology, high efficiency, long-term stable operation without leakage in the hot state, no additional cooling system is safe and reliable.
It can be widely used in the oil, grease, boilers, construction, road maintenance, pharmaceutical, plastics, rubber, synthetic fiber textile, printing and dyeing and other industrial fields, is an ideal heat carrier medium circulation pump to use temperature ≤ 370 ° C.
Performance:
Flow range: 4.5m ³ / h to 400m ³ / h
Head range: 15m ~ 78m
Motor power: 0.75kw ~ 132kw
Note: If you have special requirements, please contact our technical staff! |
|---|
[Nov 13, 2013]
|
Working Principle: Gear PumpMain applications: OilDriver: Electric motor, diesel motor.Power Specs: 380/415 V 3phase; 50hz/60hz etc.Max. permissible fluid temperature: 200°CType of connection: Flange. Threaded couplingInstallation position: HorizontalCasing/Inner parts material: Cast iron, Stainless Steel/Cast iron, Stainless steel, BronzeShaft seal type: Shaft seal ring; Mechanical seal; Packing SealFree passage: Clean MediumMaximum viscosity: 1500cStMaximum drive rating: 132 kW (177hp)Maximum caliber: 6 inch (150mm)Maximum head: 145mFlow rate range: 1.1- 576m³/h (19.3-9600)l/m |
|---|
|