Street Address: NO.151 Xinshang Road, Zhonghe
City: Chengdu
Province: Sichuan
Country/Region: China
CUMMINS, GEELY
Environmentally- Friendly Non- Asbestos Seals, Researched and developed by TEAMFUL, Obtained NATIONAL INVENTION PATENT of China. The non- Asbestos materials authorized product inspection report from SGS, INTERTEK, Singapore, Europe, Korea and National Nonmetallic Product Quality Inspection Center of People’ S Republic of China. The non- Asbestos materials are NONE OF ANY ASBESTOS. Detected by national authority organization of China, Each technical performance achieves international level.
Many types of material could be chosen. The Recommendation list of Non- Asbestos Material application is shown as following:
◆ High Level — Intend for Cylinder Head Gasket and Exhaust Manifold Gasket of all kinds of internal combustion engines such as gasoline engine, Diesel engine and etc.
Material Type
Density
(g/ Cm3)
Compressibility (%, At 34. 5 MPa)
Recovery (%)
Short duration temp.
(℃, Max. )
WAG- TL1300
2- 3
8- 18
≥ 40
400
WAG- TL1304
WAG- TL1300- P
WAG- TL1304- P
WAG3- TL1304
3- 4
8- 17
≥ 35
WAG- TL1310
≥ 2. 5
WAG3- TL1310
◆ Middle Level — Intend for oil and water sealing for gasoline, Diesel and all kinds of internal combustion engines
Tensile Strength (MPa, Min. )
TL1201- L
≥ 1. 28
15- 25
13. 0
200
TL1204- LB1
≥ 1. 40
7- 17
≥ 50
12. 7
TL1304- L
≥ 1. 30
4. 0
300
TL1401- L
10. 0
180
TL1703- L
≥ 1. 25
12- 25
≥ 30
7. 0
TL1704- L
15- 30
◆ High Level — Intend for oil and water sealing for gasoline, Diesel and all kinds of internal combustion engines
TL1305- L
≥ 1. 60
10
50
350
TL1502- L
11
45
290
TL1502- LB1
12. 5
TL1502- LJB1
≥ 1. 45
9
TL1513- L
≥ 1. 50
220
TL1515- LB1
15
TL1516- L
250
◆ High Level — Intend for gas sealing for gasoline, Diesel and all kinds of internal combustion engines
Sealing Performance, Nitrogen (cm3/ Min. , At 1MPa)
≤ 1. 0
≤ 0. 5
◆ Middle and High Level — Intend for Pipe & Flange Sealing Gasket
Change in Area
（%, At 150℃, 14. 1Mpa）
≤ 30
≤ 20
≤ 15
15. 0
≤ 10
◆ Middle and High Level — Intend for General Mechanical Sealing Gasket
Tensile Strength
(MPa, Min. )
◆ Low Level — Intend for making Non- Asbestos Composite Sheet or Heat Insulation Material , Cushion and Filler
TL1300- C
≥ 1. 10
3. 0
TL1304- CG
≥ 1. 19
3. 1
TL1310- C
0. 8- 1. 1
2. 0
TL1514- CG
0. 9- 1. 2
5. 5