Valve

Single Check Valve 3525SF- 010 This valve is mounted in braking pipeline to control the unidirectional current of compressed air, To prevent air from flowing back and to keep air courses independent to each other.

Double Check Valve 3526N- 001 It is mounted in the brake system to make two air cour- Cesfill another unit with pressure air in turn or to make two control units control another units in turn.

Drain valve 3513D- 040, 3513D- 010- A This valve is generally mounted in the bottom reservoir of used for draining oil, Water and impurities deposited the reservoir, If necessary, Also used for discharging the compressed air in the reservoir.

Relay Valves 3527N- 010 Rapid supply and evacuation of compressed Air from pneumatic actuators and complying, Reduction of veaction times in vehicle pumas broking systems.

Release Valve 3533E- 010 This device exhaust the compressed air in the brake air chamber quickly so that brake can be released rapidly.

Four circuit Protection Valve 3515N- 010 Retention of pressure in the intact braking circuits in failure of one or more circuits in for- Circuit air- Braking system.

Pressure Valve 3512N- 010 Automatic governing of the service pressure inside an air braking system. In addition to protecting the pipe work and valves from contamination (e. G water, Oil dirt and sundries ) also supplying to type the compressed air.

Safety Valve 3523C- 010 To assure of the air pressure inside the brake system within a certain range, The safety valve discharges the air into the atmosphere to guarantee the safety of the brake system in case the pressure inside the latter exceeds ...

Gas Gain Valve 3524C- 010- A This device is mounted in the pipeline system, Used for testing the pressure in the air course or bringing the compressed air out.