Product Attribute:
Applicationt: 
Universal
Production Description:
PART NO: E1158
TYPE: SWITCH MODE SPLIT CHARGER
Maximum Output (Charging) Current: 12A (PVin = 26V)
Output Voltage (V-out): 28.0V ± 0.1V
Power Input Voltage (PVin): 18V to 28V
Control Input Voltage (CVin): Charger Enabled: >26.5V / Charger Disabled: <25.5V
Control Input Current: 50A
Battery Current Drain: 250A (Charger Disabled)
Overload Protection: Yes
Thermal shutdown: Yes
Polarity Protection: External Fuses Input = 15A / Output = 15A
Connections: Flying leads
Red = Positive Input
Black = Negative Input, Output and Control
Blue = Positive Output
Yellow = Positive Control
Physical Dimensions: 215 x 71 x 55mm
Mountings: 4 x Ø 4.5mm Holes
Hole Centres: 198 x 40mm
Construction: Anodised Cooling
WIRING DIAGRAM AVAILABLE AT:
This Unit has a Yellow Control Wire which is wired directly to the +ve Connection of the 24V Cranking (Donor) Battery. The Yellow Control Wire senses the 24V Cranking (Donor) Battery Voltage and switches the Split Charger on only when the 24V Cranking (Donor) Battery is being charged.
Unlike Relay or Diode Split Chargers this Unit automatically controls the maximum charge into the 24V Leisure (Recipient) Battery preventing it from becoming over-charged / damaged and prevents the 24V Cranking Battery (Donor Battery) from becoming flat / exhausted.
For O.E.M. Customers, Leads can be terminated to suit your requirements
This Battery Charger has been designed using a building block system to obtain the power needed to suit your requirements
Also available from this range: 24A, 36A, 48A, 60A, 72A