Product Attribute:
Applicationt:
Universal
Production Description:
PART NO: E1156
TYPE: SWITCH MODE SPLIT CHARGER
Maximum Output (Charging) Current: 12A / 144W (PVin = 13V)
Output Voltage (V-out): 14.0V ± 0.1V
Power Input Voltage (PVin): 11V to 14V
Control Input Voltage (CVin): Charger Enabled: >13.3V / Charger Disabled: <12.7V
Hysteresis: 0.1V
Control Input Current: 50A
Battery Current Drain: 250A (Charger Disabled)
Overload Protection: Yes
Thermal shutdown: Yes
Polarity Protection: External Fuses Input = 15A / Output = 15A
Connections: Flying leads
Red = Positive Input
Black = Negative Input, Output and Control
Blue = Positive Output
Pink = Positive Control
Physical Dimensions: 215 x 71 x 55mm
Mountings: 4 x 4.5mm Holes
Hole Centres: 198 x 40mm
Construction: Anodised Cooling Profile
WIRING DIAGRAM AVAILABLE AT:
This Unit has a Pink Control Wire which is wired directly to the +ve Connection of the 12V Cranking (Donor) Battery. The Pink Control Wire senses the 12V Cranking (Donor) Battery Voltage and switches the Split Charger on only when the 12V Cranking (Donor) Battery is being charged.
Unlike Relay or Diode Split Chargers this Unit automatically controls the maximum charge into the 12V Leisure (Recipient) Battery preventing it from becoming over-charged / damaged and prevents the 12V Cranking Battery (Donor Battery) from becoming flat / exhausted.
For O.E.M. Customers, Leads can be terminated to suit your requirements
This Battery Charger has been designed using a building block system to obtain the power needed to suit your requirements
Also available from this range: 24A , 36A, 48A, 60A, 72A