ECU

Product Technical Parameter: Working Voltage: 8~16V Coil Resistance: 0.5 Peak & Holdpeak & hold Cylinder Type: sequential Injection 3 / 4 / 6 cylinder Input Signal: original injection petrol ...

Product Technical Parameter: 1.Working Voltage: 8~16V 2. Coil Resistance: 0.5 3. Peak & Hold: peak & hold 4. Cylinder Type: sequential Injection 3 / 4 / 6 cylinder 5. Input Signal: original injection petrol signalfuel pressure ...

Product Technical Parameter: 1.Max. Inlet Pressure: 22 MPa 2.Max. outlet pressure: 0.15MPa ~ 0.3MPa 3.Work pressure: 20MPa 4.Operating temperature: 40+ 120 5.Maximum Flow: 50m3/h Remark: There is a High Pressure Valve ...

Product Technical Parameter: Max Inlet pressure: 2.2Mpa Max output pressure: 0.12Mpa Working temperature: --40~+120 Working Medium: LPG Single Point Injection System Max Flow: 16NM3/H

Product Technical Parameter: 1. The 2 in 1 emulator can be used in 3/4 cylinder engine. 2. Working voltage: 12VDC 3. Should be installed in waterproof and high temperature prevention 4. Far away from ignition system and keep good ...

Product Technical Parameter: 1. The 2 in 1 emulator can be used in 3/4 cylinder engine. 2. Working voltage: 12VDC 3. Should be installed in waterproof and high temperature prevention 4. Far away from ignition system and keep good ...

It is a kind of ECU to be used on single injection system(Closed Loop System). WIth good quality and better service.

It is a kind of ECU to be used on single injection system(Closed Loop System). With good quality and better service.

Product Technical Parameter: The injector cut-out Emulator cuts out and simulates the operation of the injectors when the vehicle is running on GAS, thereby preventing the check-engine indicator light from coming on and possible ...

Product Technical Parameter: 1.For Low Voltage signals, and the devices anticipate the signals coming from sensors or the injection central unit that drive the electronic ignition 2.For cars with ignition - injection system with ...