Product Attribute:
Typical Clients:  
SMT PCB FPC
Production Description:
PCBA Automatic Cleaning Machine,CW-5600 Features:
1 Full process visualization : The cleaning room is equipped with a visual window,fitted with lights inside, you can see the cleaning process clearly.
2automatic cleaning mode: In a cleaning room with a spray to complete the cleaning, rinsing, drying the whole cleaning process volume occupied area is small, compact structure;
3The most scientific nozzle (patent): Using the left and right incremental distribution --- to enhance the cleaning efficiency, the upper and lower dislocation distribution - solve the cleaning blind spot completely
4nozzle pressure adjustable design: It solved the small size of PCBA in the cleaning under high pressure spray conditions under the collision, splash problem;
5Standard dilution tank heating system: Greatly improve the cleaning efficiency. Shorten the cleaning time
6A comprehensive cleaning system: It can effective clean the SMT; THT PCBA after welding remain on the surface of the residual rosin, water-soluble flux, no-clean flux / solder paste and other organic and inorganic pollutants.
7 convenient way of add the cleaning agent: It can be manually added, but also by setting the proportion (5% ~ 25%) with DI water and chemical solution automatically;
8Dedicated spray tank and auxiliary heating system: The spray bath is the working tank where the cleaning plate is to be stored during the cleaning and rinsing. Cleaning process, the solvent from the dilution tank into the spray tank and continuous heating, pressurized by the high-pressure pump spray from the spray, followed by the use of circular filtration; rinse process, the spray tank is stored in deionized water, and then Pressurized by the high-pressure pump from the nozzle after the rinse water can be heated as needed;
9Lower operating costs: Built-in filter device can be used to achieve the solvent recycling, reduce the amount of solvent used in the end of the clean air blowing method: the recovery of the pipeline and the pump residual liquid, can effectively save 50%
10concentration compensation: Dilution of the liquid after repeated use of reduced concentration, affecting the cleaning effect and cleaning efficiency, but not dirty enough, waste and waste, concentration compensation can improve the effective use of liquid, add the amount of adjustable.
The instructions of CW-5600 automatic cleaning machine:
PCBA Automatic Cleaning Machine,CW-5600 Specifications :
content
|
parameter
|
Cleaning area size
|
610mm(L)*560mm(W)*160mm(H) 2 layers
|
Concentration tank capacity:
|
40L
|
Dilution tank capacity:
|
60L
|
Spray tank capacity:
|
18L
|
Spray tank heater power:
|
6KW
|
Cleaning time:
|
0~99 Min (adjustable)
|
Cleaning temperature (liquid):
|
room temperature -75 (adjustable)
|
Rinse time:
|
1 min/ time (1-59 times / adjustable)
|
Rinse temperature (DI water):
|
room temperature -75 degrees(adjustable)
|
Drying time:
|
0~99 Min (adjustable)
|
Resistivity meter monitoring range:
|
0~18MΩ
|
Solvent tank heater power:
|
9KW
|
content
|
parameter
|
Drying temperature:
|
room temperature - 99 (adjustable)
|
Drying heater power / KW:
|
6KW
|
Jet pressure:
|
30PSI - 90PSI/(adjustable)
|
Chemical liquid level filter:
|
0.22μm (Filtrate: Paste, Rosin, Flux and Contaminants)
|
DI water filter:
|
0.22μm (Filtrate: Paste, Rosin, Flux and Contaminants)
|
water intake:
|
1 inch fast junction interface
|
Drainage:
|
1 inch fast junction interface
|
Port of discharge chemical liquid:
|
1 inch fast junction interface
|
Real-time pressure gauge:
|
3PC (Nozzle / DI water / waste)
|
Horizontal spray pump:
|
5.5KW
|
Exhaust size
|
Φ100W)×30mm(H)
|
Power supply / gas source:
|
AC380V 50HZ 65A/0.45MPa~0.7MPa
|
Net weight:
|
400Kg
|
Dimension:
|
1400mm(L)×1350mm(W)× 1830mm(H)
|