Carbon Dioxide (CO2) Sensor Modules
Telaire T6703 Series of CO2 Modules is ideal for applications where CO2 levels need to be measured to assess indoor air quality, such as residential applications. All units are factory-calibrated to measure CO2 concentration levels up to 5000 ppm.
T6703 Carbon Dioxide (CO2) Sensor Modules Applications
Method | Non Dispersive Infrared (NDIR), gold plated optics,diffusion sampling (with Telaires Patented ABC Logic Self Calibrated Algorithm) |
Measurement Range | 0 to 5000 ppm |
Dimensions |
1.18 in X 0.61 in X 0.34 in (30 mm X 15.6 mm X 8.6 mm) |
Accuracy | 400-5000 ppm ± 75 ppm or 10% of reading, whichever is greater |
Temperature Dependence | 5 ppm per or 0.5% of the reading per, whichever is greater |
Stability | < 2% of FS over life of sensor (15 years typical) |
Pressure Dependence | 0.13% of reading per mm Hg |
Calibration Interval | Not required |
Response Time | < 3 minutes for 90% step change typical |
Signal Update | Every 5 seconds |
Warm Up Time |
< 2 minutes (operational) 10 minutes (maximum accuracy) |
Operating Conditions |
14°F to 140°F (-10 to 60) 0 to 95% RH, non-condensing |
Storage Conditions | -22°F to 158°F (-30 to 70) |
Related Product Tags:
coolant sensor , crank sensor , Crank Shaft Sensor , egr sensor , electronic sensor , s3 fuel sensor , Fuel Sender , fuel sensor , fuel sensor assembly , hall sensor , head lamp sensor , car head lamp sensor , impact sensor , mark sensor , oil level sensor , throttle sensor