PSG 110 - Miniature Pressure Transducer
This subminiature pressure transducer is designed to accurately measure pressure ranges from 15 psi to 20,000 psi. Manufactured with a stainless steel diaphragm, the one piece design allows for a thin diaphragm but heavy sidewalls. This enables the transducer to be used in rugged environments while still being able to measure in low ranges. These transducers have a small electrical zero balance circuit board which is in the lead wire (approx. 1" x .087" thick).
PSG 110 Miniature Pressure Transducer Feature
High Frequency
Flush Diaphragm
Small Size and Rugged
150 to 20,000 psi
PSG 110 Miniature Pressure Transducer Specifications
Pressure Ranges |
150 psi to 15,000 psi |
Linear/Hysteresis | 150 psi to 15,000 psi - 1.0% F.S. |
Repeatability | 150 psi to 15,000 psi - ±0.1% F.S. |
Material | 17-4 PH Stainless |
Temperature Range | 60 to 160F |
Output | 150 psi to 20,000 psi - 2 mv/v |
Bridge Rresistance | 350 ohm |
Excitation | 5 Vdc |
Safe Overload | 50% Over Capacity |
Cable | 4 Twisted Leads - 5 Ft |
AVAILABLE RANGES |
T Thread |
A" Dia |
D" Dia |
B" | G" | Dia | |
PSG 110 | 150; 200; 300 psi | 3/8-24UNF | .310 | .50 | .45 | .69 | Welded |
500; 750; 1000; 1500; 2000; 3000 psi | 3/8-24UNF | .310 | .50 | .45 | .69 | Welded | |
5000; 7500; 10,000; 15,000 psi | 3/8-24UNF | .310 | .50 | .45 | .69 | Welded | |
PSG 111 | 150 - 15,000 psi | 7/16-24NF | .375 | .56 | .50 | .75 | Welded |
*Stocked ranges are in bold type. The 3/8-24 Threaded Transducer is stocked only. 7/16-20UNF available on all models |
Related Product Tags:
coolant sensor , crank sensor , Crank Shaft Sensor , egr sensor , electronic sensor , s3 fuel sensor , Fuel Sender , fuel sensor , fuel sensor assembly , hall sensor , head lamp sensor , car head lamp sensor , impact sensor , mark sensor , oil level sensor , throttle sensor