PTG 400 Series - General Purpose Pressure Transducer
The PTG 400 is a competitively priced, high quality all stainless steel, pressure sensor intended for use in the measurement of gases and liquids. This series is suitable for automotive diagnostics tools, refrigeration, hydraulics, pneumatics and data loggers. The PTG 400 pressure sensors are designed specifically for applications with demanding price and performance requirements. These sensors offer both millivolt and high level outputs. The high strength sensing element is machined from a solid piece of stainless steel, resulting in construction that contains no silicone oil, welds or internal O-rings. Measurements are available in gauge pressure covering ranges up to 10,000 PSI.
PTG 400 Series General Purpose Pressure Transducer Features
Low Static and Thermal Errors
Welded Case
Suitable For High Shock And Vibration
EMI/RFI Protection
Cable, din or 1/2 Conduit Pipe Electrical Termination
PTG 400 Series General Purpose Pressure Transducer Specifications
Pressure Ranges | 25 to 10,000 PSI |
Accuracy | ±0.25% to ±.5% F.S |
Material |
17-4PH Wetted Parts 304 SS Housing |
Temperature Range | 30º to 130º F - Compensated |
Output |
0.5-4.5 Vdc Ratiometric 1-5,1-6 Vdc, 10 mV/V or 4-20 mA |
Excitation | 5 Vdc, or 10-28 Vdc |
Safe Overload | 200% Over Capacity |
Burst Pressure | 5X or 20,000 PSI whichever is less |
Cable | Specify Below |
NOTE: Certifications available for .5% units at additional cost. Certifications come standard for .25% and .1%.
AVAILABLE RANGES | ||
-14.7-25 (compound), 25, 50, 100, 200, 500, 1000, 2500, 5000, 10,000 PSI For Accuracy Specify the following: PTG 400 - .5% F.S. Unamplified (no certs) PTG 401 - .25% F.S. Unamplified PTG 402 - .5% F.S. Amplified (no certs) PTG 403 - .25% F.S. Amplified Pressure Connection: A = 1/4 NPT Male B = 1/8 NPT Male F = 7/16-20 UNF Male Pressure Units: B=Bar, K=Kg/cm2, P=PSI |
Outputs: 1= 0.5- 4.5 V ratiometric 3= 1-5 Vdc 4= 4-20 mA 6= 1-6 Vdc A= 10 mV/V Wetted Material: 0=17-4PH 1=316 L Electrical: A=2Ft, B=4Ft, C=6Ft, D=10Ft, E=Mini DIN 43650, F=Packard Metripack 150 3-Pin Conn. |
Order Code Example:
|
Related Product Tags:
coolant sensor , crank sensor , Crank Shaft Sensor , egr sensor , electronic sensor , s3 fuel sensor , Fuel Sender , fuel sensor , fuel sensor assembly , hall sensor , head lamp sensor , car head lamp sensor , impact sensor , mark sensor , oil level sensor , throttle sensor