Global Auto Parts & Accessories Marketplace
GRADE | CHEMICAL COMPOSITION(max,%) | |||||||||
Total carbon |
Free carbon |
Impurities(max,%) | ||||||||
Nb | Fe | Si | O | N | Na | K | Ca | |||
ZrC | 11.2 | 0.40 | 0.01 | 0.05 | 0.05 | 0.5 | 0.1 | 0.01 | 0.005 | 0.01 |
HfC | 6.15 | 0.30 | 0.005 | 0.05 | 0.005 | 0.5 | 0.05 | 0.005 | 0.005 | 0.05 |
TaC | 6.20 | 0.10 | 0.1 | 0.05 | 0.01 | 0.15 | 0.02 | 0.005 | 0.005 | 0.01 |
NbC | 11.1 | 0.15 | --- | 0.01 | 0.01 | 0.3 | 0.02 | 0.005 | 0.005 | 0.01 |
VC | 17.7 | 0.5 | 0.01 | 0.05 | 0.01 | 0.5 | 0.1 | 0.01 | 0.005 | 0.01 |
Cr3C2 | 12.8 | 0.30 | 0.01 | 0.08 | 0.04 | 0.7 | 0.1 | 0.03 | 0.005 | 0.005 |
TiC | 19.1 | 0.30 | 0.01 | 0.05 | 0.02 | 0.5 | 0.2 | 0.01 | 0.005 | 0.01 |
Mo2C | 5.85 | 0.20 | 0.01 | 0.05 | 0.05 | 0.50 | 0.10 | 0.01 | 0.005 | 0.01 |
Particle size:0.5-500micron ,5-400mesh | ||||||||||
Particle size and chemical composition are modified on request. |
TiCN 50/50 & TiCN 30/70 |
1.Titanium carbide nitrides powder TiCN with high thermal shock and abrasion resistance. It is used for powder metallurgical (P/M) parts including cutting tool tips, dies and wear parts and resistant coatings. It is also used as an additive to plastic & rubber parts to reduce wear and as an alternate to metal parts. Suitable to serve as the high-speed cutting tool material to extremely control the accuracy and tolerance; Widely use to process carbon steel, stainless steel, micro alloy steel, and Ductile Cast Iron. |
VC |
2. Vanadium carbide powder vc Vanadium powder is an extremely hard refractory metal that is most often used as an additive to tungsten carbide in manufacturing blades and bits for cutting tools. |
Cr3C2 |
3.Chromium carbide is used as a thermal spray material for protecting the underlying metal surface, and as an additive to corrosion-resistant and wear-resistant materials. It is used as a finecrystal phase in other sintered carbides, where, like the vanadium carbide, it inhibits growth of submicrometre grains during pressing and sintering. |
HfC |
4.Hafnium carbide is used in hard coatings and often applied by processes such as plasma spraying. |
Mo2C |
5.Micro molybdenum carbide has diverse uses in traditional & high-tech industries like mechanics, electronics, aeronautics, metallurgy, chemistry, environment, etc. |
NbC |
6.Niobium carbide has an extremely low solubility product in austenite. When niobium carbide is added by micrometre-sized precipitates, it is virtually insoluble in steels at all temperatures. Niobium carbide's location at ground boundaries prevents excessive grain growth. |
TiC |
7.TiC are very hard gray crystals that are insoluble in water but soluble in nitric acid and aqua regia. It melts at about 3140°C. it is used in cermets, arc-melting electrodes, and tungsten-carbide tools. An extremely hard and light refractory material with high thermal shock and abrasion resistance. It is used for powder metallurgical (P/M) parts including cutting tool tips, dies and wear parts and resistant coatings. It is also used as an additive to plastic & rubber parts to reduce wear and as an alternate to metal parts. |
TaC |
8.Tantalum carbide is hard refractory crystalline powder in brown color, mainly used as additives to cemented carbides, making molding tools and antioxidation coating. |
ZrC |
9.Zirconium carbide can be used in new insulation thermostat textiles, nylon, fiber, hard alloy, nano-structured parts and devices. |
Compound carbide powder |
(Ta,Nb)C, (W,Ti)C, (W,Ta)C, (Ti,Ta)C, (W,Ti,Ta)C, (W,Ti,Ta,Nb)C powders |
Related Product Tags:
coil wire , magnetic ring , oil pump rotor , oil pump rotors , oil pump rotor gear , pump rotor , oilpump rotor , rod guide , Sinter Rod Guide , Powder Metallurgy Rod Guide , Metallurgy Rod Guide , Absorber Rod Guide , sintered part , sintered parts