Grade | CHEMICAL COMPOSITION(max,%) | |||||||||
Total carbon | Free carbon | Impurities(max,%) | ||||||||
Nb | Fe | Si | O | N | Na | K | Ca | |||
LF-TaC | 6.20 | 0.10 | 0.10 | 0.05 | 0.01 | 0.15 | 0.02 | 0.005 | 0.005 | 0.01 |
Particle size:0.5-500micron , can be as requested. |
TaC introduction |
1) Tantalum carbide (TaC) is an extremely hard (Mohs hardess 9-10) refractory ceramic material. The hardness is only exceeded by diamond. It is a heavy, brown powder usually processed by sintering, and an important cermet material. It is sometimes used as a fine-crystalline additive to tungsten carbide alloys. 2) It burns in air with a bright flash and only slightly soluble in acids. Has a metallic luster. |
TaC Application: |
1) Tantalum carbide is often added to tungsten carbide/cobalt (WC/Co) powder attritions to enhance the physical properties of the sintered structure. It also acts as a grain growth inhibitors preventing the formation of large grains, thus producing a materials of optimal hardness. 2) It is also used as a coating for steel moulds in the injection moulding of aluminium alloys. While providing a hard, wear resistant surface, it also provides a low friction mould surface. 3) Tantalum carbide is also used in the production of sharp instruments with extreme mechanical resistance and hardness. 4) It is also used in tool bits for cutting tools. |
main products of LFJS |
1.Powdered materials including Chromium Carbide Cr3C2 , Hafnium Carbide HfC, Molybdenum Carbide Mo2C, Niobium Carbide NbC, Tantalum Carbide Tac, Titanium Carbide TiC, Vanadium Carbide VC, Zirconium Carbide ZrC, Titanium Carbide Nitrides Ti (C,N); (suitable for plasma coating, thermal spray coating, cold spray,additive in cutting tools,CVD,PCB,3D printing,abrasive materials,MIM,powder metallurgy,etc) 2.compound carbide powder: (Ta,Nb)C,(W,Ti)C , (W,Ta)C, (Ti,Ta)C (W,Ti,Ta)C, (W,Ti,Ta.Nb)C,(W,Ti,Ta,Cr)C. 3. Ti (C,N) based cermet rods/ inserts/blanks; (suitable for drilling and cutting tools, ,CNC tools, printed circuit board, drilling milling turning threading turning tools etc.Sinter-HIP process.) 4. WC-CO tile cutting wheel. 5.planetary ball mill |
contact us: |
skype:shunjiangu; email:vera at langfengmetallic.com; mobile:86-15974242234 wechat:veragmail; |
|
CHEMICAL COMPOSITION(max,%) |
|||||||||
Total carbon |
Free carbon |
Impurities(max,%) |
||||||||
Nb |
Fe |
Si |
O |
N |
Na |
K |
Ca |
|||
LF-TaC |
≥6.20 |
≤0.10 |
0.10 |
0.05 |
0.01 |
0.15 |
0.02 |
0.005 |
0.005 |
0.01 |
Particle size:0.5-500micron , can be as requested. |
Property of Tantalum carbide powder:
Molar Mass: 192.958 g/mol
Colour: Light to Dark Brown
Density: 13.9 g/cm3
Melting Point: 3880°C
Boiling Point: 5500°C
Hardness: 2000 Knoop / 9-10 Mohs
Vickers Hardness: 17.65 GPa / 1800VHN
Young's Modulus: 285-630 GPa
Poisson's Ratio: 0.1719-0.24
Thermal Conductivity: 22.2 W/m·°C
TaC introduction |
1) Tantalum carbide (TaC) is an extremely hard (Mohs hardess 9-10) refractory ceramic material. The hardness is only exceeded by diamond. It is a heavy, brown powder usually processed by sintering, and an important cermet material. It is sometimes used as a fine-crystalline additive to tungsten carbide alloys.
2) It burns in air with a bright flash and only slightly soluble in acids. Has a metallic luster.
|
TaC Application: |
1) Tantalum carbide is often added to tungsten carbide/cobalt (WC/Co) powder attritions to enhance the physical properties of the sintered structure. It also acts as a grain growth inhibitors preventing the formation of large grains, thus producing a materials of optimal hardness. 2) It is also used as a coating for steel moulds in the injection moulding of aluminium alloys. While providing a hard, wear resistant surface, it also provides a low friction mould surface. 3) Tantalum carbide is also used in the production of sharp instruments with extreme mechanical resistance and hardness. 4) It is also used in tool bits for cutting tools. Contact us:skype:shunjiangu; email:vera at langfengmetallic.com; mobile:86-15974242234 (whatsApp)
|
Related Product Tags:
coil wire , magnetic ring , oil pump rotor , oil pump rotors , oil pump rotor gear , pump rotor , oilpump rotor , rod guide , Sinter Rod Guide , Powder Metallurgy Rod Guide , Metallurgy Rod Guide , Absorber Rod Guide , sintered part , sintered parts