DC48V SWITCH /FRESH AIR DAMPER ACTUATOR
SWITCH actuator applies to control the fresh air damper in the bus AC system.
Turn on /off the fresh air device of AC system by putting through/cutting off the control wire(+) of the actuator.
Application case:
WINIA MANDO, HYUNDAI , KIA, SSMC, DAIHAN, DENSO,YUTONG BUS.
Accessories
1.Bracket:plentiful selects, or customization;
2.Lever:plentiful selects,or customization ;
3.Connector:customization.
Newbase Actuator is used for Vehicular Air Conditioning & Heating Control System, such as bus, van, auto ,engineering truck, refrigeration system and so on.
They could be used for fresh air damper , air supply system or heater system, and also used for engine cooling system.
There are several types of actuator mainly,
Intake Actuator ---- two wires, it open the damper to some an angle and close by changing the poiarity of wiring.
Switch Actuator ---- three wires, it turn on/off the damper by putting throught/cutting off the control wire.
Temp Actuator ---- five wires, the actuator operates by switching the poiarity of witing, it could also give a feedback of the postion to the HVAC system.
Mode Actuator---- seven wires, it could control the damper to stop on different positions.
Voltage control actuator ---- it's driven by 0~10 V voltage signal.
NEWBASE ACTUATOR production capacity is 20,000pcs monthly. These Actuators are exported to many countries in Asia, Europe, Amercia widely for many years.