Product Attribute:
Material:Rubber
Size:1/8inch
DOT:SAE J1401
Applicationt:
Mazda ( Mazda Rx(china))
Mazda ( Mazda 5(china), Rx-8)
Mercedes Benz ( C Class(china), E Class(china), G Class, M Class, A Class, R Class, Gl Class, Cls Class, Clk Class)
Misubishi ( Pajerosport)
Mitsubishi ( Pajerosport(china), Outlander(china), Lancer(china), Gallant(china))
Nissan ( Tiida(china), Tenan(china), Sylphy(china), Geniss(china), Livina(china), Paladin(china), X-trail, Cefiro, Fuga, Cima, 350z, Quest)
Opel ( Zafira, Vectra, Astra, Antara)
Peugeot ( 206(china), 307(china), 206, 307, 206cc, 307cc, 407, 607, 207, 207cc, 307sw)
Renault ( Magane, Laguna, Scenic)
Suzuki ( Alto(china), Lingyang(china), Swift(china), Sx4(china), Liana(china), Jimny, Grand Vitara)
Toyota ( Previa, Rav4, Prado, Hiace)
Volkswagen ( Santana(china), Polo(china), Touareg(china), Tiguan(china), Bora(china), Golf(china), Jetta(china), Sagitar(china), Magotan(china))
Volvo ( S40(china), C30, C70, S80, Xc90, Xc60, S40)
Changhe Auto ( Idea(china))
Wuling
Polarsun Automobile
Production Description:
we are a porfessional manfuacture of hydrualic rubber brake hose SAE J1401 1/8".
there arebelows kinds:
3.2mmx10.5mm 1/8" HL SAE J1401 (two layer white rayon reinforced).
3.2mmx10.5mm 1/8" HL SAE J1401 (two layer red and one layer white rayon)
3.2mmx10.5mm 1/8" HL SAE J1401 (three layer red rayon reinforced).
Others like 4mmx12mm, 4.8mmx12.5mm etc
Hydraulic rubber brake hose producing standard: SAE J1401, DOT FMVSS 106, DIN ISO3996 etc.
Our brake hose has a firm agglutinate between the outer rubber and the yarns, which resists brake fluid,resist aging and leakage
SAE J1401 1/8 RUBBER BRAKE HOSE
Pressure Test :20.7Mpa-24.8Mpa Hold 10-15Sec.
Burst Test :49.03Mpa No Leakage No Blowing Off
Tensile Test: 1446N
Ozone Test: 50+5ppm , 40+3 72hrs No cracks