Product List

Small-diameter linear propeller will be assembled with a preserving frame which has low noise when it works. Attach a sign of "A" at the end of the nominal type, when the temperature is above 80C. We will assemble l preserving frame for safety. But ...

Small-diameter linear propeller will be assembled with a retainer frame which has little noisy when it works. Please write a sign of "A"at the end of the nominal type, when the temperature is above 80centigrade degree, we'll assemble mental retainer ...

1. The ballscrew is widely used in high-precision machinery. It is a crucial component. 2. When ball scres are subjected to selection, it is a most fundamental rule that you must first clearly find out what the operation conditions are before going ...

1: Joint rod end Bearing(GE. ES) 2: Outer ring with single split axial direction 3: Lubrication grooves and holes in the out of inner rings of type ES 4: Outer ring of type -2RS witn two seals 5: Both outer and inner rings are properly ...

1. Bearing with a stretching rod, which is female thread, the direction of the thread is right or left-hand. 2. The type GIHR...K...DO is made up of a spherical plain radial bearing of type GE...ES and rod body. 3. The housing with a lubricaltion ...

Ball joint housing is an axial shank with the female thead, it is made up of zinc base alloy, stretching rod with right or left-hand thread.

1. Bearings with a stretching rod, stretching rod with right or left hand, female or male thread. 2. It is made up of a fast movement spherical-plain radial bearing and rod body. 3. Rod body was forged by bearing steel GCr20, inner ring was milled ...

1: Retainer material: Aluminun alloy. Bronze. Nylon 2: Ourter ring: Ball material: Gcr15