Product Attribute:
Material:PP
Polish:High Polish
Applicationt:
Chevrolet, Mercedes Benz
Production Description:
Auto plastic button,car plastic buckle,plastic nut,plastic clip,auto plastic protection button
In general, the buckle is composed of a positioning member and a fastener. When the positioning part is installed, the guide buckle is smooth, correct and fast to reach the installation position. And the fastener function is. Removable fasteners are usually designed when applying the separation force after a certain buckle will be disengaged, two connecting pieces separated. This clasp, often used to connect the two parts need to often open. Do not remove the fasteners need to be the fastening pieces of the deviation, the two parts can be disassembled, and more for the use of the process does not open the parts of the connection and fixation.Characteristics of clasp:A fastener is an embedded connection or integral locking mechanism for a part and another part, usually used for connection of a plastic part, which is usually made of a plastic material with a certain flexibility. The biggest characteristic of the buckle connection is convenient to install and disassemble, and can be disassembled without tools. Now buckle connection technology has been increasingly applied in automobile interior connection.Attention to the installation of the card buckle:When the card is installed, the operator is mainly through the hand feel and sound to determine whether the installation is in place, so the design needs to pay attention to the following points:1), select the appropriate amount of deformation. Buckle fastener through the deformation and rebound to achieve installation. But too small deformation is easy to cause the installation is not strong; too much deformation and easy to cause the installation is difficult or even can not be installed, the failure of the card buckle.2), design, attention should be made when the card is installed on the position of some of the more obvious phenomena, such as the sound and feel of the changes.3), design, pay attention to the number of constraints, can not appear over constraint. Constraint too much, the precision of the parts processing requirements. In the actual assembly process, easy to cause the installation is not in place or can not be installed.
In general, the buckle is composed of a positioning member and a fastener. When the positioning part is installed, the guide buckle is smooth, correct and fast to reach the installation position. And the fastener function is. Removable fasteners are usually designed when applying the separation force after a certain buckle will be disengaged, two connecting pieces separated. This clasp, often used to connect the two parts need to often open. Do not remove the fasteners need to be the fastening pieces of the deviation, the two parts can be disassembled, and more for the use of the process does not open the parts of the connection and fixation.
Characteristics of clasp:
A fastener is an embedded connection or integral locking mechanism for a part and another part, usually used for connection of a plastic part, which is usually made of a plastic material with a certain flexibility. The biggest characteristic of the buckle connection is convenient to install and disassemble, and can be disassembled without tools. Now buckle connection technology has been increasingly applied in automobile interior connection.
Attention to the installation of the card buckle:
When the card is installed, the operator is mainly through the hand feel and sound to determine whether the installation is in place, so the design needs to pay attention to the following points:
1), select the appropriate amount of deformation. Buckle fastener through the deformation and rebound to achieve installation. But too small deformation is easy to cause the installation is not strong; too much deformation and easy to cause the installation is difficult or even can not be installed, the failure of the card buckle.
2), design, attention should be made when the card is installed on the position of some of the more obvious phenomena, such as the sound and feel of the changes.
3), design, pay attention to the number of constraints, can not appear over constraint. Constraint too much, the precision of the parts processing requirements. In the actual assembly process, easy to cause the installation is not in place or can not be installed.
sales(at) xingxu-rubber.com
xingxurubber (at)163.com