Bearing

WZB-2boundary lubrication bushing is based on a composite material with 3 firmlybonded layers : steel as backing , sintered bronze spherical powder asinterlayer and modified POM. as lining layer. It fits well for low speed, heavyduty and normal ...

JDB-4 is based on cast iron Ht250 and embedded with solid lubricant. Verygood performance when under low load. Not suitable for middle and high load. A typical cost saving material, can substitute JDB-2 to be applied in theposition without high ...

This is copper or aluminum or plastics bastcs based material, on which the rollers are aranged oderly in certain angle and intervals. Moreover, the retaining technique is improved that dropping of the rollers can be thoroughly prevented.The friction ...

WZB JF-800 bimetal bushing is based on steel and sintered with CuPb10Sn10 as a lining layer. This type has the best performance within the range of Cu-Pb alloy constructured bushing. Thereforce it has a wide application and is mostly suitable for ...

WZB-090 is a kind of bushes wrapped by bronze strip. The bronze is of particular formulation with high specific gravity and on its surface may be incorporated with spherical of diamond shaped indentations or oil grooves as required by customers. It ...

WZB JF-800 bimetal bushing is based on steel and sintered with CuPb10Sn10 as a lining layer. This type has the best performance within the range of Cu-Pb alloy constructured bushing. Thereforce it has a wide application and is mostly suitable for ...

JDB-1 Base material: CuZn24AL6 Base Hardness: HB230-270 Friction coef(u): 0.16 Temperature limit : 300 Dynamic load limit: 100N/mm 2 Load limit under lm/min: 25N/mm 2 Speed limit (Dry): 0.4m/s Speed limit (Oil): 5m/s PV limit:3.8N/mm 2. ...

FZ Linear BearingThis is copper or aluminum or plastics bastcs based material, on which the rollers are aranged oderly in certain angle and intervals. Moreover, the retaining technique is improved that dropping of the rollers can be thoroughly ...

WZB-2Y non-lead boundary lubrication bearing is improved on the basis of SF-2X. It can be applied to the field where non-lead is required. Now it's widely used in textile machines,auto operating parts and other middle speed, middle load and grease ...

WZB-1D hydraulic bushing is developed on the basis of SF-1P and meanwhile considering the motion way of oil pump and damper. It is the substitute of and parallels in performance with abroad DP4. In addition to covering the same usage of SF-1P. SF-1D ...