Product Attribute:
Applicationt:
audi
Production Description:
Force comparison of the dentalline NiTi-Wires
Force value table:
Comparison of Thermally Plus, Light Force, Thermally and NiTi SE.
NiTi Superelastic (NiTi-SE)
Superelastic NiTi wires are particularly indicated for use with selfligating bracket systems. Due to its extremely smooth surface the friction between bracket and archwire is significantly reduced. Thus losses when transferring forces can be minimized and treatments can be arranged more effective. The higher elasticity and small regidity of the wire make this an ideal orthondontic material, which shortens the duration of therapy by gentle and constant recovery forces.
NiTi-SE with Dimple
The dentalline wires are also available with a v-shaped dimple insted of a midline marking.
NiTi-SE pre-stopped
dentalline offers the NiTi-SE wires already pre-loaded with crimpable stops. The stops are friction fit on the wire and so they slide to position and stay there. A final crimp of the stop with a plier or cutter is then applied to permanently set the stops in place. Pre-stopped wires are effective with any bracket system and are especially popular or use with self ligating brackets.
NiTi-SE with Front Torque 20°
To strengthen torque in the anterior segment the NiTi SE with anterior torque is available. This rectangular wire was specially developed for DamonTM* technique and offers the same qualities as the classical NiTi SE. It is available with an anterior width of 28, 34 and 38mm.
NiTi Reverse Curve Wires
In particular for the correction of strongly pronounced vertical malocclusions the use of the NiTi Reverse Curve archwire is recommended. With good patient comfort this archwire ensures the delivery of gentle, constant forces.
The RC wires are available in three different forms: Form I (with moderate curve, torque and distal toe-in), Form II (with moderade curve and no distal toe-in or posterior torque) and Damon*-Form.
NiTi Light Force
The NiTi Light Force provides similar qualities as the superelastic NiTi archwire, but with much lower force level. NiTi Light Force archwires are
permanently deformation resistent and easy to ligate even with strongly pronounced malocclusions. Also available:
-
NiTi Light Force with Dimple
-
NiTi Light Force pre-stopped
NiTi Thermally
Due to its low and constant force application the NiTi Thermally archwire with round cross-section is perfect suitable as initial wire. At room temperature soft and flexible, it can be ligate easily and without any problems. Brought in the mouth, the NiTi Thermally develops its gentle force (Shape Memory Effect).
With the help of rectangular and square NiTi Thermally archwires besides first tasks of rotation or torque can be solved in a gentle way. Also available:
-
NiTi Thermally with Dimple
-
NiTi Thermally pre-stopped
NiTi Thermally Plus
The NiTi Thermally Plus offers an extremely low force level. Its constant force application enables a continuous therapeutic effect with high patient comfort. Easy to ligate, the NiTi Thermally Plus provides an excellent thermal capacity and temperature sensitivity. Also available:
-
NiTi Thermally Plus pre-stopped
NiTi 3-Stepped-Force
The NiTi 3-Stepped-ForceTM combines superelastic and thermo-active qualities. The archwire has three force-adapted wire segments: While the wire is thermo-active in the front (gentle forces), it shows superelastic qualities with higher force application in the posterior. In the bicuspid segment however, the NiTi 3-Stepped-ForceTM works with medium therapeutic force. This increases from front to rear. The arch form of the NiTi 3-Stepped-ForceTM with the three functional areas can on request be individually adjusted.