Product Attribute:
Certification:FCC
Size:136*77*15mm
G.W:235g
Voltage:12v
Color:as request
Output1:12V/200-400A for car jump start
Output2:5V/2A for digital devices
Input:12V/1A
OEM:Yes
Applicationt:
All kinds of cars whose displacement is less than 3.0 liter
Production Description:
|
PRODUCT SPECIFICATION: |
ACCESSORIES: |
|
Batter Material: |
|
lithium polymer cell |
12V 1A Charger x 1
12V 1A Car Chargerx1
Jump Clampx1
Manual x 1
Color Box Packing x 1 |
|
Batter Capacity: |
|
5400mAh |
|
Input: |
12V/1A |
|
Output: |
5V/2A |
|
12V JUMP START |
|
Start Current: |
|
200A |
|
Peak Current: |
|
400A |
|
Charing Time: |
|
2Hrs |
|
Size: |
136*77*15mm |
|
Weight: |
235g |
|
Operration Temp: |
|
-20°C~60°C/-4°F~140°F |
|
|
|
Life Time: |
+8000 Cycles |
|
|
|
|
|
|
|
Illumination
Press the switch button 3 seconds to start the normal LED illumination and then 3 modes of LED light appear in sequence (burst flashing, SOS, off) if you press lightly
1. First Press for 3 seconds torchlight
2. second press lightly burst flashing
3. third press lightly SOS
4. final press lightly off
Multi-Function
1. supply power for the digital devices using 5V/2A via USB connector
2. using for car jump start direclty via specially designed battery clips
Advantage
1. the intelligent IC card and other electronic components on the guard plate are developed by our USA researching team and imported from Japan, its energy transferring rate can reach over 90%
2. the battery cell is made of Li-polymer, which is environment-friendly and much safer and more stable, and it gets UL certificate
3. the appearance of this car jump starter is designed by experts, fashionable and compact, it can become your one fashionable item
4. our home charger is offered by the supplier who is the supplier of
Apple Computer Inc, owning high quality and fashionable appearance
5. the battery clamps is anti-converse charge
How to use to start the vehicle
1. Make sure the battery power is available for use when starting the car. Press the switch button lightly to check there are at least 2 LED bright lights then remember to press again to finish checking
2.Connect the battery clamps to car battery
Red battery clamp must be connected
with car battery positive(+) terminal,
while black battery clamp with car
battery negative(-) side. |
3. Insert the other end of plug into Jump starter
4. Turn the ignition switch to start the car
5. Disconnect the plug immediately after the start
6. Remove the battery clamps
Warning
1. do not connect the clamps in the opposite way, red clamp connects "-" battery of the car and black clamp connects "+" battery fo the car
2. when the battery clamps is connected to the car jump starter, don't connect the red clamp with the black clmap directly
3. disconnect the car jump starter with the battery clamps once the car is started, and then remove the battery clamps from the car's battery
4. store it in dry and lower temperature place