Production Description:
On vehicle models from the E65 on, BMW is for the first time using fibre- Optic cables as standard for communication between control units. The optical buses are notable for their high data transmission rate and they are not susceptible to electromagnetic interference. The optical buses in question are the MOST bus, Primarily used for in- Car entertainment electronics, And the byteflight bus, Which serves predominantly safety- Critical functions. OPPS has been designed for encoding, Individualising and programming ( CIP) via the Software Service Station (SSS) and envisaged for use as part of the BMW diagnostic system (DIS) from DISPlus and Group Tester One (GT1). It is intended for testing and programming tasks from the E65 series, Taking the place of the diagnostic head. OPS is intended for rapid programming of control units. When operated at the SSS, No diagnostic or technical measuring pro- Cedures are possible, As no measuring technology is incorporated; In this instance, OPPS / OPS is used predominantly for programming control units (flashing). Communication with the vehicle can be performed both via the MOST and via the OBD interface. The OBD interface is required for the power supply to the OPPS / OPS and has communication properties via which the vehicle can be identified and the data to be programmed can be determined. From CIP version 7. 0, It is possible to delete fault code memories via OPPS / OPS. Package including: OPS head 16 Pin Cable LAN cable (RJ45 / ODU plug) Fiber Cable SSS VERSION V. 22 for IBM T30 (optional) PC VERSION SSS with update originally (optional) The fllowing overview shows which vehicle interfaces are approved for vehicle diagnosis on vehicle model series: vehicle model Vehicle interface(connection via OBD- II )socket E87 YES E90 , E91 , E92 YES E60 , E61 , E63 , E64 YES E65 , E66 YES E70 YES E83 YES E85 , E86 YES E38 ( OBD- II ) YES E39 ( OBD- II ) YES E46 ( OBD- II ) YES E52 YES E53 YES R56 YES R50 , R52 , R53 YES E31 NO E32 NO E34 NO E36 NO E38 ( 20pin ) NO E39 ( 20pin ) NO E46 ( 20pin ) NO Application Program : OPS USE SSS Software The fllowing overview shows which vehicle interfaces are approved for vehicle programming on vehicle model series: vehicle model Vehicle interface(connection via OBD )socket MOST compatibility (multichannel programming) OPS / OPPS Onl possible if MOST port fitted E87 YES YES E90 , E91 , E92 YES YES E60 , E61 , E63 , E64 YES YES E65 , E66 YES YES E70 YES YES E83 YES NO E85 , E86 NO E31 NO E32 NO E34 NO E36 NO E38 NO E39 NO E46 NO E52 NO E53 NO R56 YES YES R50 , R52 , R53 YES YES Standard Config OPS Multiplexer OBD- II Diagnostic Cable (CAN included) MOST Diagnostic Cable LAN Cable