Product Attribute:
Inner diameter:200mm
Number of Row:Single Row
Bore Size:200mm
Outer Diameter:250mm
Size:37mm
Type:Roller Bearing
Mass:495 kg
Basic dynamic load rating axial:395000 N
Basic static load rating axial:1550000 N
Fatigue limit load:134000 N
Limiting speed:1290 1/min
Reference speed:550 1/min
Allocated axial cylindrical roller and c:K81140-M
Allocated housing locating washer:GS81140
Allocated shaft locating washer:WS81140
CET1:ISO 9001 2008
CET2:TUV
Applicationt:
THB-Axial Cylindrical Roller Bearings 81140M Brass Cage
Production Description:
Axial cylindrical roller bearings:
Axial cylindrical roller bearings comprise axial cylindrical roller and cage assemblies K, housing locating washers GS and shaft locating washers WS. The bearings have very low axial section height, high load capacity, high rigidity and can support axial forces in one direction.The cage assemblies comprise axial cage and one or two rows of cylindrical rollers.
The cages are made from plastic or brass and are guided as standard on the shaft.
The cage assemblies have very low axial section height and high load carrying capacity. They can support axial forces in one direction. Radial forces must be supported by separate means.
Axial cage assemblies are combined with shaft or housing locating washers or are integrated directly in the adjacent construction. If they are used without axial bearing washers, the raceway must be produced as a rolling bearing raceway.
Axial bearing washers housing locating washers:
Housing locating washers are centred on the housing and must be used if the adjacent construction cannot be used as a running surface. The bore diameter, outside diameter and running surface are precision machined.
Shaft locating washer:
Shaft locating washers are centred on the shaft and must be used if the adjacent construction cannot be used as a running surface. The bore diameter, outside diameter and running surface are precision machined.
Bearing washers:
Bearing washers can be used as housing or shaft locating washers; they are used in applications where precise centring is not required. The bore and outside surface are turned, the running surface is ground.
Bearing washers can be used with axial cylindrical roller and cage assemblies K811 and axial needle roller and cage assemblies AXK.
Operating temperature:
Axial cylindrical roller bearings and axial cylindrical roller and cage assemblies can be used at operating tempretures from -20oC ~ +120oC