Product Attribute:
Length:28cm
Width:25cm
Height:20cm
model:INTL-C149A
groove:1pk
voltage:24CV
car made:Compressor Sanden SD7H15 8051 Daf 85/95 (03)
parts number:SANDEN 8182 1251063 1264800 1444295 1638737 7856 8051 8127
compressor type:SANDEN 7H15 709 SD709 SD7H15
clutch diameter:133mm
Oil Type:PAG46
Applicationt:
Compressor Sanden SD7H15 8051 Daf 85 (95 (03))
Production Description:
Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee
SANDEN 7H15 709 DAF Truck 85/95 ac compressor
Specification:
Model number: INTL-C149A
Car name: DAF
Compressor type: SANDEN 7H15 709 SD709 SD7H15
Pulley DIA: 133mm
Grooves: 1A
Voltage: 24V
Year: 07 92>12 00
Displacement 154,9 cc
Refrigerant R134a
Oil Type PAG 46
Oil Quantity 175 cc
Autoclima Oil code 80813043
Suction fitting PAD
Discharge fitting PAD
Section Groove 12,7 mm
Special Notes:
OEM:
1444295
7H15-8182
8182
1251063
1264800
1444295
1638737
7856
8051
8127
8182
HS220510
8FK351 119-341
9000020
BEHR HELLA service
Details
Compressor Sanden SD7H15 8051 Daf 85/95 (03)
Aircopomp/ACpomp/Pompairco/Aircocompressor
For Daf Truck Type
XF 95 / XF95
CF 85 / CF85
CF 75 / CF75
95 XF / 95XF
85 CF / 85CF
75 CF / 75CF
Description on Article:
HS220510 / 2010-05-14 / 8FK 351 119-341
R134a / 99000020 / AEJ03H
C / D / H / RD / F / B / A / S / D
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced