Product Attribute:
Length:28cm
Width:25cm
Height:20cm
voltage:12V
groove:6pk
parts number:447260-1496 4472601496
car made:TOYOTA Corolla/Verso/Auris/Avensis/RAV 4/Scion xB/Scion xD
Model:INTL-XZC020
type:DENSO 6SEU14C
OEM:88310-02370 88310-02450 88310-02451 88310-02510 88310-1A660
pulley diameter:119mm
Applicationt:
for Toyota Corolla, Verso, Auris, Toyota Avensis, Toyota RAV 4, Toyota Scion xB and Toyota Scion xD
Production Description:
Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee.
DENSO 6SEU14C for TOYOTA Corolla/Verso/Auris/Avensis/RAV 4/Scion xB/Scion xD ac compressor
Specification:
Model number: INTL-XZC020
Car name: for Toyota Corolla, Verso, Auris, Toyota Avensis, Toyota RAV 4, Toyota Scion xB and Toyota Scion xD
Compressor type: DENSO 6SEU14C
Pulley DIA: 119mm
Year Model: 2012-
Grooves: 6PK
Voltage: 12V
Special Notes:
OEM:
88310-02370
88310-02450
88310-02451
88310-02510
88310-1A660
447260-1492
447260-1493
447260-1494
447260-1495
447260-1496
447260-2931
8831002370
8831002450
8831002451
8831002510
883101A660
4472601492
4472601493
4472601494
4472601495
4472601496
4472602931
Details
Can used for:
2012- for Toyota Corolla
for Toyota Verso
for Toyota Auris
for Toyota Avensis
for Toyota RAV 4
for Toyota Scion xB
for Toyota Scion xD
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced