Applicationt:
any
Production Description:
good quality with competitive price
one year quality gurranty
quick delivery
skype: amanda924fung
Description:
1. The KV Ignition system quick tester ADD 760 is designed to work on distributor and
DIS systems, and it can
quick measure KV value of the secondary ignition and compare peak kV, or verify the
proper firing of the secondary
ignition system.
2. Quick tester battery Operated and easy to use, simply place the probe over the ignition
wire.
3. Each time the tester detects a spark firing, it will flash the Super Bright LED strobe
indicating a spark-firing event with sufficient arc duration. Then press the button and the unit measures and
displays peak kV on the
LCD display. Super Bright LED strobe allows the user to determine if the secondary
ignition is firing consistently,
intermittently misfiring, or not firing at all. Indicates spark polarity on DIS systems. Detect
problems caused by
faulty wires, plugs, cap, rotor, coil(s), etc.
Applications:
1. Quick Check Mode:
1)To enter the Quick Check Mode, simply turn the tester on. The tester automatically enters
this mode when it
is powered on.
2)During this mode, the red and green LEDs alternately flash once every second until a
spark is detected.
3)Once a spark is detected, the Red LED light flashes and the red or the green LED lights
to show the polarity.
Notes:
1) If the tester does not detect a spark after 30 seconds, it automatically turns off.
2) The Quick Check Mode may not detect spark voltage less than 5 kV. Use the
Measurement Mode to verify.
2. Measurement Mode:
During this mode, the red and green LEDs stay lit while the tester measures the peak
spark voltage (for
approximately 10 to 15 seconds).
When the tester finishes a measurement, it will do all of the following:
1)The tester emits a beeping sound
2)The headlight flashes 3 times
3) The corresponding polarity LED lights
4) LCD displays the current KV reading for 15 seconds