Bus AC compressor clutch for 10P30B

Product Attribute:

Supply Ability:10000 Piece/Pieces per Week compressor clutch

Delivery Details:Send out compressor clutch within 3 working days after payment

Production Description:

Auto air conditioning compressor clutch 10P30C & 10P30B application for TO YOTA Co aster

Brand New Clutch we only supply ensure 100% original. All types of compressor clutch 10P30C, including Belt Groove as follows: A, 2A, B, 2B, double O. The information here is just one of these models and if it is not you want, please let me know your car model, year and engine model.

Content

1. What car model 10p30c compressor clutch fit for?
2. Which clutch fit for me: 10P30C or 10P30B?
3. Technical details for 10P30C compressor clutch
4. AC Compressor clutch hub remove for To yota
5. Clutch hub installation process for co aster
6. What guarantees provide for 10P30C co aster clutch?
7. What is this clutch or replacement policy?
8. Troubleshoot checklist on compressor clutch
9. Do you supply technical support for 10P30C clutch?
10. What other customers order together with clutch?
11. To yota co aster clutch frame structure display
12. Bus AC compressor clutch for To yota co aster pictures

1. What car model 10P30C compressor clutch fit for?

This bus ac compressor clutch 10P30C fit for all TO YOTA Co aster models up to now. TO YOTA Co aster made in USA, Japan and China. Fit for TO YOTA Co aster mini bus with compressor 10P30C & Denso compressor 10P30B.

2. Which clutch fit for me: 10P30C or 10P30B?

It will be judge from the following 2 points: 1).Where is your Co aster place of original? 2).Which year of your Co aster? Please confirm us the above information, our engineers will check for you easily!

3. Technical details for 10P30C compressor clutch:

Clutch Brand: DENSO
Vehicle model	To yota CO ASTER
Compressor model	10P30C 10P30B
Voltage	12V, 24V
Belt Groove	A & 2A,B&2B,double O
Outer Diameter	167mm/177mm
Screw tightening torque	20.6 - 24.5 N • m (210-250 kgf • cm, 15.1-18.1 ft • lbf)
Clutch Gap	0.8 ± 0.2 mm
Stator coil resistance value 20°C	12     (2.9 ± 0.2 Ω), 24 V (12.4 ± 0.4 Ω)

4. AC compressor Clutch hub Remove for To yota

1. Remove clutch retaining ring or nut. Use a spanner wrench to prevent the hub plate from turning.

2. Attach the tool to the end plate by threading the outer nut of the tool into the center hole of the clutch end plate.

3. Tighten the inner tool arbor against the end of the compressor shaft to lift the plate.

5. Clutch hub Installation process for co aster

1. Position the shaft key in place.

2. Slide the clutch hub onto the shaft of the compressor. Be careful not to damage the components by using excess force.

3. Thread the inner part of the tool onto the shaft. Tighten the outer nut of the tool to push the shaft key in.

4. Set the air gap. Add or remove shims to obtain the mfg. specifications. Always set at the min. number and measure at multiple points around the circumference.

5. Reinstall the retaining ring or nut.

6. Check oil level and rotate the hub with the nose of the compressor down to help lubricate. You can check for ease of rotation.

6. What guarantees provide for 10P30C compressor clutch?

We give 1 year warranty for this clutch. At the same time, we also provide repair service.

7. What is this clutch or replacement policy?

We will confirm all the necessary information before you place order. If this compressor clutch not fit for your compressor, we will accept return or replacement. All the shipping cost caused will be paid by our company.

8. Troubleshoot checklist on compressor clutch

For failure diagnosis of the clutch being replaced, use the guide below to troubleshoot the new clutch.

A. Symptom: Clutch will not disengage
Possible Causes	Solution
• Improper hub/armature to rotor/pulley air gap (too small)	• Reset air gap
• Current is always on	• Check electrical system
• Rotor/pulley snap ring not installed correctly	• Install per instructions
B. Symptom: Clutch will not engage
Possible Causes	Solution
• Improper hub/armature to rotor/pulley air gap (too big)	• Reset air gap
• Field coil electrical wiring is not connected	• Connect field coil wiring
• Faulty field coil	• Check field coil for continuity
• Less than 10.8 volts supplied to field coil (all accessories on)	• Check electrical system
C. Symptom: Clutch is noisy
Possible Causes	Solution
• Field coil or rotor pulley snap rings are not installed correctly	• Check for correct installation
• Belts too loose	• Tighten per A/C manufacturer’s service manual
• Bearing noisy (new clutch only)	• Return to manufacturer
• Clutch not burnished	• Burnish per instructions
D. Symptom: Clutch slips
Possible Causes	Solution
• Belts too loose	• Tighten per A/C manufacturer’s service manual
• Voltage to field coil less than 10.8 volts (all accessories on)	• Check electrical system
• Improper wiring or connections	• Check electrical system
• Oil or grease on friction surfaces	• Replace clutch
• Clutch not burnished	• Burnish clutch per instructions

 

9. Do you supply technical support for 10P30C clutch?

Our engineers have experience with auto ac repair and exchange. If you order from us, we are not only sell you product, we will also send tech files together with the clutch: air conditioner maintenance project details and exchange instruction file. We will make sure you use it correctly and happily.

10. What other customers order together with clutch?

To yota CO ASTER air conditioning compressor, Shaft Seal, ac fan, ac motor, expansion valve etc all related to ac system, you can find satisfy one in Shumatt.

11. To yota co aster clutch frame structure display12. Bus AC compressor clutch for To yota co aster pictures Chat Now Contact Supplier   Continue in Alibaba.com App   Open Cancel