Home » Showroom » » Products » Fuel Pressure Regulator » FSC-100/FSC-200 fuel injector tester&cleaner non-dismantle cleaner
Company Info
Shenzhen Shumatt Technology Ltd.

Street Address: 403a, Bldg. 1, Noble Plaza, Guanlida Bldg. , Xinan St. , Baoan District

City: Shenzhen

Province: Guangdong

Country/Region: China

View Contact Details

FSC-100/FSC-200 fuel injector tester&cleaner non-dismantle cleaner


FSC-100/FSC-200 fuel injector tester&cleaner non-dismantle cleaner

Market Type:  After Market

Packing:  Fuel system Cleaner has standard package

Delivery Port:  Hongkong

Minimum Order:  1 Set

Product Attribute:

Supply Ability:1000 Set/Sets per Week fuel system cleaner/tester/ analyzer

Delivery Details:1-2 working days after payment

Production Description:

Fuel System Cleaning Bottle Non-Dismantle Cleaner FSC-100

Fuel System Cleaning FSC-100 can clean fuel injector, Air intake system and Three-Way Catalytic Converter, it is a Free disassembly cleaning tools for MST-A360 Fuel injector cleaner and tester.

FSC-100 Fuel System Cleaner Description

2. Check fuel injection style, throttle or EFI

TO EFI STYLE:

1. Find out the fuel return hose, disconnect it and plug it with suitable adaptor;

2. Find out the fuel inlet hose, disconnect it and connect it with the outlet hose of the cleaner with proper adaptor;

3. Connect the outlet and return hose of the fuel tank, and open the tank cover; if there is not return hose, please move the fuse of the fuel pump so that the pump will not work;

4. Charge the cleaning fluid into the tank of the cleaner;

5. Connect the air source power to the air port of the cleaner, adjust its pressure 40-50PSI;

6. Check all connect point to make sure there is not leakage;

7. Start the engine to clean the fuel system.

NOTE:

1. To the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI.

3. The way to identify the inlet and return hose:

1. Generally speaking, inlet hose is bigger, return hose is smaller;

2. There is always a filter connected in the inlet hose side, and a buffer in the return side;

3. There is arrow on the hose to show the fuel flow direction

4. Wear protective glasses before operation . observe the joint whether there is oil leak. if there is, please start to work after remove the fault. as a result of losses caused by human negligence, the user undertakes the responsibility

  

Fittings of FSC-100 Fuel System Cleaner

Any further question, just contact me freely.

Chat Now Contact Supplier

Send your message to this supplier

Enter between 20 to 3,000 characters, English only.
http://en.gasgoo.com/new/common/contactsupplier.aspx?type=4&id=1112038