Product Attribute:
Brand Name:Diagnostic Scanner
Type:Car Diagnostic Scanner diagnostic tool
Function:Auto Diagnostic tool
Applicationt:
Europe, Asia, Japanese vehicles etc
Production Description:
Product Name: Auto Diagnostic Tool PP2000 LEXIA 3 Interface Citroen And Peugeot Diagbox
PP2000/LEXIA-3 Interface latest version, works for both Citroen and Peugeot! Dealer diagnostic scanner is well suit for comprehensive Citroen and Peugeot cars diagnostic. You can do all as authorized dealer does. This diagnostics software allows you to perform complete diagnostics of all from 1995 until present models. Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001). This item 100% works fine. It is tested by tens of users.
Latest software version:
Citroen Lexia V48
Peugeot PP2000 V25 (11A)
Diagbox V6.01 Software
PP2000/LEXIA-3 Interface works with both Citroen and Peugeot
Full adapter package with Lexia-3 Citroen/Peugeot Diagnostic contains 30pin old line, total 6 lines,
Peugeot PP2000 for querying , management function, programming and diagnosing, etc.
Citroen PORXIA3, supports all models of Citroen, for programming, matching, diagnosing, etc.
Latest software support testing all 2012 vehicles models, support the Peugeot 508
Test systems
ENGINE, automatic transmission, air conditioning system, SRS, ABS, ASR, MPL, GM, anti-theft system, OBD-II system, and so on.
Testing function
Read fault codes, clear the fault code, dynamic data stream , computer matching program, component testing, etc. It is the maintenance of Peugeot-Citroen car best helper
Latest software version
Citroen Lexia V48
Peugeot PP2000 V25 (11A)
Diagbox6.19
Latest software support to test all 2012 vehicle models, support the Peugeot 508.
Citroen PORXIA3 supports all models of Citroen, for programming, matching, diagnosing, etc.
Latest models supported by latest Diagbox 3 in 1 software
Peugeot models: 1061072052062073063073083094054084074085086056078068071007300840075008ionHOGGARRCZBIPPERPARTNRTEXPERTBOXER etc.
Citroen cars: CITROEN, Elysee,C-QUATRE, Picasso, Xsara and C-Triomphe ,AXZXXMBERLINGOC1C2C3C4C5C6C8C15DS3DS4DS5, and so on.
DIAGBOX diagnosis system is Citroen and Peugeot universal of next-generation diagnosis program, it contains Diagbox, PPS, and LEXIA three sets diagnosis program, basically covers all Peugeot and Citroen models.
Software update
We offer upgrade free 1 year by CD or email.
Languages Supported
1. English
2. German
3. French
4. Japanese
5. Russian
6. Spanish
7. Portuguese
8. Swedish
9. Turkish
10. Dutch
11. Polish
12. Italian
13. Hungary
14. Greek
15. Czec
Operation system
Windows XP is suggested for your operation system.
Supported Functions
Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
1. Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2. Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3. Clear fault codes
Clears all stored fault codes and other diagnostic information.
4. Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6. Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc)
7. Programming functions/Adaptation
This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.
Compatible Vehicles
1. Citroen cars including C1, C2, C3, C4, C6, C8, C-CROSSER, NEMO, BERLINGO, JUMPY, JUMPER, AX, SAXO, BX and so on. But please pay attention, according to our customer experience, this item cant works good at C5 models.
2. Most Peugeot cars from 1995, but it can not work well with Peugeot 307.
If you have these two types of cars, please pay attention. Please check with us first before purchase.
Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Peugeot Bipper
Peugeot Boxer III
Peugeot Boxer III minibus
Citroen Nemo
Citroen Jumper III
Citroen Jumper III minibus
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98/2000/XP with the latest service pack installed.
Packing list
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable
1pc x 16pin to Clip Cable
1pc x Instruction for Installation and Activation DVD for PP2000
If you need the 30 pin code cable, you should pay an extra of USD 10 for it!
FAQ
Q: What is the way to do more cars?
A: You can choose the S.1279 module of PPS2000 Lexia-3 Citroen Peugeot and use with lexia-3 together. Then it can do more cars you want.
Note: Please don't try to disassemble the machine. No warranty if the machine is disassembled!