SV-2LB Filter Semiautomatic Smoke Meter

Product Attribute:

Type:Fuel Injector Tester

Output Power:220w

Output Voltage:220v

Length:610mm

Width:500mm

Height:325mm

Typical Clients:  

Middle East

Production Description:

  SV-2LB-filter semiautomatic Smoke meter

Features:

SV-2LB-filter semiautomatic Smoke meter, which is produced according to the national standard GB/T11798.5-2001 and GB3847-83, can be used to detect the smoke level of diesel car ,the combustion analysis and the research of diesel engine.

  The instrument cramps out a definite store of exhaust from vent-pipe and get them through a certain area of filter paper. Then you can have the test result of exhaust concentration by the black granule on the filter paper (unit: Rb ).

  SV-2LB, equipped with Nixie tube, is easy to operate by Prompt lamp and separately displays the lasted three test result and the average of them.

  Addition: The strong point of SV-2LB: Air compression is not needed while it works.

The main technical parameters:

1. Measurement scope  0-10 Rb
2. accuracyNot exceed FS ±3
3. Repeatability: Not exceed FS ±2
4. StabilityNot exceed FS ±2/h
5. Resolution  0.1 Rb
6. Environmental condition temperature0~40
7.               Relative humidity20-80
8.               Air pressure70~105kPa
9.               power AC  220V±10%50Hz
10. Preheat time 5min
11. Sampling system
12.    swept volume330ml±15ml
13.    swept actuation time1.4S±0.2S
14.     tightness of extracting pump   The air infiltration capacity is not exceed 15ml in one minute.
15. filter specificationm,thickness0.18mm,
16. Equivalent pore diameter: 45um,
17. air permeability :3000ml/cm2.min, brightness: 85
18. Sampling tube: cylinder: 5mm, length: 5m.