[Dec 17, 2010]
 |
Product:Self Aligning Ball bearings
Characteristics:
1.Self Aligning Ball bearings,which has the self aligning function just like self aligning roller bearing,mainly bear radial load.It can also carry light axial load but it can not bear pure axial load.
2.The axia displacement of axis or housing is limited within axial clearance limit.
3.Since self aligning ball bearing has self aligning function,it is quite suitable for use in double supporting axis which is easy to bend under the action of load,as well as in the parts where the bearing saddle bore can not strictly guaranty the coaxiality.However,the relative gradient beween the centre lines of inner ring and outer ring should not be over 3℃.
4.Self aligning ball bearing is a kind of double row ball bearing designed with two deep groove raceways on inner ring and spherical outer raceway.
5.Our self aligning ball bearings have the characteristics of small radial section,compact structure,reliable performance,low vibration noise,long service life.etc. |
|---|
[Dec 17, 2010]
|
Product:Single row angular contact ball bearing
Single row angular contact ball bearings can be divided into separable type and inseparable type .
1.1 Separable type
S70000 type is the basic model of separable single row angular contact ball bearing.SN70000 type is the whose inner ring is separable.Its inner ring and outer ring can be installed separately,so it is quite suitable for use in the place where installation is restricted
1.2 Inseparable type
The inner ring and outer ring of inseparable angular contact ball bearing can not be installed separately .There are mainly three kinds of structural styles
Contact angle а=15℃,counter bore is on outer ring,and the bearing is 70000 C type,
Contact angle а=25℃,counter bore is on outer ring,and the bearing is 70000 AC type,
Contact angle а=40℃,counter bore is on outer ring,and the bearing is 70000 B type.
Single row angular contact ball bearings,except four point contact ball bearings,can only bear unidirectional axial load.They will bring about extra axial force when bear radial load,At that time,there must be corresponding reverse radial load.Thus single row angular contact ball bearings are usually used in pairs. |
|---|
[Dec 17, 2010]
 |
Product:Sing Row Full Complement Cylindrical Roller Bearing
Single row full complement cylindrical roller bearing is a kind of cylindrical roller bearing that can carry an extremely heavy radial load and can carry unidirectional axial load.
Its axial orientation can be realized by using a symmetrically-placed bearing of the same kind.
Our single row full complement cylindrical roller bearings are easy to dismount and have the characteristics of excellent radial loading capacity,high intensity and high accuracy,etc. |
|---|
[Dec 17, 2010]
|
Product:Single row taper roller bearing
Single row taper roller bearing can only limit unidirectional axial replacement of axis or housing and carry unidirectional radial load.An axial component force will be generated when the bearing is carrying radial load,so another bearing which can take reverse axial force is needed to balance the load.
Products have passed ISO9001:2000 quality system certification. |
|---|
[Dec 17, 2010]
|
Product:Spherical Thrust Roller Bearing
Spherical thrust roller bearings are the self-aligning roller bearings used to support the radial load and axial load,inclining to axial load,The radial load should b not more than 55% of axial load.
Our spherical thrust roller bearings are designed with two rows of symmetrical spherical rollers, a common sphere raceway on outer ring and two raceways on inner ring.
The bearings have good self-aligning ability,high load carrying capacity,and anti-impact ability,They permit a low limiting speed. |
|---|
[Dec 17, 2010]
|
Product:Split spherical roller bearings
Split spherical roller bearings are small in size and compact in structure .They can be installed directly without disassembling the circular shafts and other component parts used in conjunction with original bearings,which will save installation time and reduce cost.
Split spherical roller bearings are quite suitable for applications where there is limited space or where it is difficult to disassemble bearings. |
|---|
|