Product Attribute:
Type:Headlight
Voltage:12V
Lamp Type:HID Xenon
Certification:CE,ROHS
Car Make:all kinds of car models
Place of Origin:Guangdong China (Mainland)
Brand Name:World,OEM
Model Number:World-SB Flexible Kit
Warranty:18 Months
color temperature:3000K-30000K
wattage:35W or 55W
voltage:12V or 24V,AC or DC
lumen:3500LM
hid inner tube brand:Phillips
quality:top rank
bulb:bi-xenon,single beam
life span:50000hours
defective rate:within 0.1%
packing:aluminum box or color box
Production Description:
High quality xenon hid kit:
H1/H3/H4/H7/H8/H9/H10/H11
12V,24V,35W,50W
3000K-12000K
hid kit,xenon kit,hid light kit:
Xenon hid all models:
Single series:H1,H3,H3C,H4,H6,H7,H8,H9,H10,H11,H13,880(H27),881,889,9004(HB1),9005(HB3),9006(HB4),9007(HB5),etc
Single+Halogen(High/Low)Series:H4-2,H13-2,9004-2,9007-2
Telescopic(moving,High/Low) series:H4-3,H13-3,9004-3,9007-3
D series:D1R,D1S,D2C,D2R,D2S,D4C,D4R,D4S
Color Temperatures:3000K,4300K,4500K,5100K,6000K,8000K,10000K,12000K,or above
Light colors:golden light,green,pink,red,dark blue,QB,purple etc.
World-SB Ballast technical data:
1)Input Voltage Range DC9V~32V
2)Typical Operating Voltage DC12.8V
3)Typical Operating Voltage DC24V
4)Typical Input Current 3.2A, Condition: DC 12.8V Input
5)Typical Input Current 1.8A, Condition: DC 24V Input
6)Max. Inrush Current 15A
7)Output Power 33W±2W(Constant Power)
8)Output voltage AC85V±15V (Square Pulse, RMS70V~100V)
9)Output Frequency 260Hz~280Hz
10)Efficiency: ≥83%, Condition:
11)Ignition pulse Typical peak Voltage 23kV
12)Typical duration 1s
13)Cooling method Natural cooling
14)Input Protections Under voltage protection at 6V±1V
Over voltage protection at 34.5V±1V
Input connection-reverse protection
15)Output Protections Short circuit protection between two outputs
Open circuit protection between two outputs
Operating temperature -30°C~+ 85°C
Storage temperature -40°C~+105°C
16)The ballast matches lamps as H1, H3, H4, H4 (H/L), H7, H8, H9, H10, H11, H13, 9004, 9005, 9006, 9007, 880, 881
17)We offfer 18months warranty for our best quality slim ballast
Advantage of World xenon bulb:
- The burner is made by Philips from Netherlands?
- The tube electrode is made by Sylvania from USA.
- The purity of mercury reach to 99.999999%.
- Xenon with high purity and best protection is made by Messers from Germany.
- The tube atmospheric pressure over 6 atm for increased luminous flux,to protect the electrode and prolong the bulb’s life.
- This input wire is made by Volkswagen.
- The bulb voltage range is controlled between:85±10V.However the international standard is 85V±17V.
- Our product line equipments are imported from South Korea,the most advantaged in China at present.
- Special research and produce ballast which according to the parameter of bulb.Long lifetime and low defective rate.
Our ballast is developed according to the xenon bulb features,and we do the six strict testing for it.
Light distribution,opthalmic test,aging,matching,precipitate and strike a light.
Didfferent components between World-SB Ballast and other company's ballast:
1.Our high voltage bage have 4layers.It can do 2300V-4000V high voltage start.Low quality high voltage bag do
≤2000V voltage.After using some days,the start voltage will decrease to 1800V.When the voltage lower than 1800V,the ballast can't light up the hid bulb.Our high voltage bag response fastest.
2.Imported IR MOS tube.It can offer stable voltage.Low quality MOS tube,due to the voltage and wattage didn't match,after using some days,it will loss and burnt.
3.USA AMP connector
4. Janpan red ruby capacitance,125 degrees.Other company's 105 degrees.12 degrees capacitance can stand high temperature.
The higher rank component,the higher efficiency and emitting small heat.
FAQ:
1.After installing HID,it happen to light flashing.
World answer:Due to the battery cell can’t offer enough electricity,it happen to light flashing.Adding special harness can resolving this problem.
2.After installing hid,it happen to astigmatism.
World answer:Due to the ballast offer the electricity imbalance,it happen to astigmatism.Adding resistor harness can resolve this problem.
3.After installing H1 hid,it happen to light flashing.
World answer:Due to the H1 base is very small,it need fix exactly,then it will no lamp flashing problem.
Ballast Advantage1.We use stand 125degrees high temperature capacitance.Other company use 105degrees capacitance can't stand high temperature.Capacitance is most important component and has many function,like filter,resonance,shunt circuit and so on.
The capacitance good or bad will decide the ballast life span directly.
2.Our SB 12V 35W AC ballast has 4 layer circuit board.Other company has only 2 layer for AC ballast.
3.We have 6pcs mosfet on 1 AC 35W ballast.Other company has only 4pcs or less mosfet on it.Mosfet function is control frequency.
4.We use Japan TDK transformer,capacitance and transformer produce resonance step-up.
6.Full filled silicon high voltage bag can do 23000V starting voltage.Other company high voltage bag fill little silicon into it.It can’t do 23000V starting voltage.
7.Initial startup without concussion in the global.
8.with silicon gel sleeve on the enamel-insulated wire,To stop the high voltage puncture and avoid the break circuit instance.
9.AMP connector,anti-high temperature,Philips inner tube,put an end to spillage the xenon gas,Japanese Rubycon capacitance,Special material which mostly use for army industrial .it is more than 20 degree working range than the normal capacitor.
SB And NB BallastOur SB ballast is slim ballast and NB ballast is normal size ballast.Slim ballast is used updated components to save the size,then it is easy to install and shipping coveniently.
Like desktop and laptop,more than more people choose laptop now.
AC And DC BallastAC ballast has no positive and negative pole difference.The electron number alternately cycle move,then the pole temperature is low and prolong hid life span.
But for the DC ballast,the electron number is always from positive to negative pole.Then the negative receive the electron number will be much heat,high temperature and perforation.The defective rate of DC ballast is higher than DC ballast.
AC ballast has better and more components than DC ballast.Our AC ballast has 6pcs mosfet and DC ballast has 2pcs mosfet.
Certifications
Custom Clearance
Our Services
Trade Process