GM TECHII (CANDI&TIS)

Production Description:

Name: GM Tech-2 PRO Kit (CANdi & TIS) Description: The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2007 Features: Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles. Support for on-board diagnostics on all GM systems 1992 thru current year. Removable hardware modules provide insurance against scan tool obsolescence. Large, easy-to-read backlit screen. RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash. Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review. Ability to view the status of vehicle diagnostic tests as they run. Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics. Vetronix Tech 2 Specifications Dimensions 12″×6″×2″ Microprocessor 32 bit, 16 MHz Memory 32 MB flash type II PCMCIA. Type III slot available for future expansion. Communications Integral RS232 communication port. Screen 3.8″×2.8″ backlit monochrome with full graphics capability: 320×240 pixels. Displays up to 9 vehicle parameters at once Download Tech2 Brochure (5.2 Mb) GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!): Tech-2 Flash Tester 32 MB PCMCIA Card with GM OE Applications CAN diagnostic interface module(CANdi) and instruction sheet download ( 199.2 kb ) GM aftermarket Expertec TIS software on CD-ROM disks Hardware lock to open SPS programming in TIS 2000 RS232 cable and user's manual. Data/Sensor/Trouble Code Manual DLC Cable, DLC Loopback Adapter 12V Cigarette Lighter Power Cable SAE 16/19 Adapter NAO 12/19 Adapter Battery Power Cable Storage Case Tech-2 Users Manual download ( 3.9 Mb ) Tech-2 Flash Registration Card An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash' s diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II. The following GM vehicles utilize the CAN interface: ' 05 Buick Allure (3.6L) ' 05 Buick LaCrosse (3.6L) ' 05 Buick Rainier (5.3L) ' 04-' 05 Buick Rendezvous (3.6L) ' 04-' 05 Cadillac CTS (3.6L) ' 04-' 05 Cadillac SRX (3.6L / 4.6L) ' 04-' 05 Cadillac XLR (4.6L) ' 05 Cadillac STS (3.6L / 4.6L) ' 05 Chevrolet Cobalt (2.2L) ' 05 Chevrolet Corvette (6.0L) ' 05 Chevrolet Equinox (3.4L) ' 05 Chevrolet TrailBlazer (5.3L) ' 05 Chevrolet SSR (6.0L) ' 04 Chevrolet Malibu (Body/Chassis only) ' 05 Chevrolet Malibu (3.5L) ' 05 GMC Envoy (5.3L) ' 05 Pontiac G6 (3.5L) ' 05 Pontiac GTO (6.0L) ' 05 Pontiac Pursuit (2.2L) ' 03-' 05 Saturn ION (2.2L)