Pure Graphite PTFE Packing With Oil,Braided from the Graphite PTFE yarn which with special lubrication, designed for dynamic. Pure Graphite PTFE Packing With Oil Description: SUNWELL P202 made of 100% graphite PTFE yarn. And re-impregnated with a silicone lubricant. It is a economical graphite PTFE packing. Pure Graphite PTFE Packing With Oil Typical Application For used in pumps, valves, reciprocating and rotating shafts, mixers and agitators Can be safely used in all chemical pump applications with the exception of molten alkali materials, fluoride, fuming nitric acid and other strong oxidizing agents. It is against water, steam, petroleum derivatives, vegetable oil and solvents. Prime Features Tough and durable Self-lubricant, heat and chemical resistant. Pure Graphite PTFE Packing With Oil Technical Data Material 100% Pure Graphite PTFE yarn with Silicone Oil Temperature Range -150 up to +280 o C Process Rotating 25 bar Reciprocating 100 bar Static 200 bar Shaft Speed 16m/s PH 0~14 Density 1.65g/cm 3
Tanged Metal Reinforced Graphite Gasket Description Gaskets made by 98% pure exfoliated graphite reinforced a central layer of 0.1mm thickness tanged stainless steel. The graphite is compressed without the use of adhesives. Tanged Metal Reinforced Graphite Gasket Prime Features Exceptional resistance to blow-out and crushing. Tough and versatile composite for high pressures. Strong composite construction with or without eyelets. Tanged Metal Reinforced Graphite Gasket Specifications Density: 1.0g/cm3 Compressibility (ASTM F36A): 15~35% Recovery (ASTM F36A): /= 20% Pressure: 200bar Temperature: -240~+550 oC PH: 0~14 Dimension ASME B 16.21, DIN2690, And according to your requirements
Graphite PTFE Packing is a specially engineered yarn combining graphite and PTFE. As both PTFE and graphite are excellent sealing , this gives GPTFE packing great sealing properties that other products can not offer. Pure Graphite PTFE Packing Typical Application For used in pumps, valves, reciprocating and rotating shafts, mixers and agitators Can be safely used in all chemical pump applications with the exception of molten alkali materials, fluoride, fuming nitric acid and other strong oxidizing agents. It is against water, steam, petroleum derivatives, vegetable oil and solvents. Pure Graphite PTFE Packing Prime Features Tough and durable Self-lubricant, heat and chemical resistant. Pure Graphite PTFE Packing Technical Data Material 100% Pure Graphite PTFE yarn Temperature Range -150 up to +280 o C Process Rotating 20 bar Reciprocating 100 bar Static 150 bar Shaft Speed 16m/s PH 0~14 Density 1.4~1.6g/cm 3
Pure Expanded Graphite Gasket Description A premium quality graphite jointing gaskets made by 98% pure exfoliated graphite. High quality grade made by 99.8% grade graphite is available for nuclear industry applications. Pure Expanded Graphite Gasket Prime Features Widest temperature range.. Very easy to cut: although large gaskets may need support during carriage and fitting. Pure Expanded Graphite Gasket Specifications PDensity: 0.7~1.0g/cm3 Compressibility (ASTM F36A): 30% Recovery (ASTM F36A): /= 10% Pressure: 40bar Temperature: -240~+550 oC PH: 0~14 Dimension ASME B 16.21, DIN2690, And according to your requirements.
Carbonized fiber packing braided from shrink-proof synthetic fiber impregnated with PTFE, Silicone-oil-free. Oxidized fiber has high strength and good thermal conductivity, PTFE makes the packing have excellent self-lubrication. Carbonized fiber packing is braided from carbonized fiber yarns, impregnated with PTFE dispersion. It is inert to almost all corrosive chemicals. It can replace PTFE asbestos packing within wide service range. Carbonized Fiber Packing Typical Application Be used in weak acids and alkalis or media containing few grains of solid particles Mainly used for centrifugal pumps, plunger pumps, mixers and valves. Carbonized Fiber Packing Prime Features Without cooling it can be used with hot water up to 160 deg.C, with cooling up to 207 deg.C. Does not damage shafts and has long life Excellent self-lubrication Carbonized Fiber Packing Technical Data Material 100% carbonized fiber and PTFE Temperature Range -50 up to +280 o C atmosphere; Process Rotating 20 bar Reciprocating 100 bar Static 200 bar Shaft Speed 25m/s in rotary PH 2~12 Density 1.1~1.3g/cm 3
RX Ring Joint Gasket Description The style RX is an adaptation of the standard style R which energizes on assembly. The RX is designed to fit the same groove design as a standard style R, making the joints interchangeable. Consideration should be given to the difference in finished make-up distance. The modified design uses an energizing on assembly effect with improves the efficiency of the seal. RX Ring Joint Gasket Tolerances (Inches) "A" Width of ring: +0.008-0.008 "H" Height of ring: +0.008-0.000 "OD" Outer dimension of ring: +0.020,-0.000 "23o" Angle: +/- 1/2o Standard Standard style R ring type joints are manufactured in accordance with both API 6A and ASME B16.20 size and ratings. Available in both oval and octagonal configurations, both types are interchangeable on the modern octagonal type grooved flanges. As with all metal ring type joints including style RX, it is recommended to replace the ring when flange connection is broken.
Aramid fiber packing braided from high quality Dupont aramid and kevlar fiber with PTFE impregnated and lubricant additive. It is wear resistant but may damage the shaft is not used properly. A minimum shaft hardness of 60HRC is therefore recommended. Aramid fiber packing is braided from high quality Dupont aramid fiber with PTFE impregnated and lubricant additive. It shows good chemical resistance, high elasticity and very low cold flow. It can resist severe media and higher pressure. The packing is lubricated with silicone based compound for quick and easy break-in. SUNWELL P301L aramid fiber packing with insert lubricant Without impregnation, an extremely durable, highly abrasive resistant packing. It is an idea for slurry service application. Aramid Fiber Packing Typical Application This is a universal packing which can be used for pumps in all types of industry. Chemical, petrochemical, pharmaceutical, food and sugar industries, pulp and paper mills, etc. A durable packing able to withstand granular and abrasive applications. Aramid Fiber Packing Prime Features It is wear resistant but may damage the shaft if not used properly. A minimum shaft hardness of 60HRC is therefore recommended. Superior performance Lower frictional factor Aramid Fiber Packing Technical Data Material Dupont Aramid Fiber (with or without PTFE impregnated) Temperature Range -100 up to +280 oC Process Rotating 25 bar Reciprocating 100 bar Static 250 bar Shaft Speed 25m/s PH 2~12 Density Appr. 1.4g/cm3
Oval Ring Joint Gasket Description The ring type joint was initially developed for high pressure and temperature applications found in the petroleum industry and is primarily used in the oil field on drilling and completion equipments. However, today this product range can also be found on valves and pipework assemblies, along with some high integrity pressure joints. Oval Ring Joint Gasket Tolerances (Inches) "A" Width of ring: +/-0.008 "B" "H" Height of ring: +/-0.020 "P" Average pitch diameter of ring: +/-0.007 "23o" Angle: +/- 1/2o Standard Standard style R ring type joints are manufactured in accordance with both API 6A and ASME B16.20 size and ratings. Available in both oval and octagonal configurations, both types are interchangeable on the modern octagonal type grooved flanges. As with all metal ring type joints including style R, it is recommended to replace the ring when flange connection is broken.
Graphite Packing with PTFE Impregnated is braided from Expanded graphite yarns which impregnated with PTFE as a blocking agent thus creating a non-straining packing. The yarns are reinforced by textile fibers. Graphite Packing With PTFE Impregnated Typical Application Can be used in many demanding applications, both dynamic and static Particularly suited for high temperature and high pressure service in valves, pumps, expansion joints, mixer and agitators of pulp and paper, power station and chemical plant etc. Graphite Packing With PTFE Impregnated Prime Features Excellent cross-section tightness, structural strength Very lo friction-valve, wear resistant, yet gentle to shaft and stem. Graphite Packing With PTFE Impregnated Technical Data Material 100% Expanded Graphite Yarn and PTFE oil Temperature Range -200 up to +280 oC Process Rotating 3 Mpa Reciprocating 10 Mpa Valves 20 Mpa Shaft Speed 22m/s in rotary PH 0~14 Density 1.5 g/cm3
With tanged metal reinforced inside. Tough and versatile composite for high pressures. Strong composite construction without adhesives. Extra strength for ease of handing and fitting. With or without eyelets. Description Gaskets made by 98% pure exfoliated graphite reinforced a central layer of 0.1mm thickness tanged stainless steel. The graphite is compressed without the use of adhesives. Prime Features Exceptional resistance to blow-out and crushing. Tough and versatile composite for high pressures. Strong composite construction with or without eyelets. Specifications Density: 1.0g/cm3 Compressibility (ASTM F36A): 15~35% Recovery (ASTM F36A): /= 20% Pressure: 200bar Temperature: -240~+550 oC PH: 0~14 Dimension ASME B 16.21, DIN2690, And according to your requirements More informations, please click the "PDF" download or contact with us.