Product Name: Threaded Insert With Good Quality Application:all kind of cars. 1. it could enhance the connection strength and abrasion resistant, especially in AL, MG, Cast Iron and other low strength materials. 2.improve thread s stress state and to be spring connection, remove the errors of pitch and thread angle, protect the thread avoiding to be broken, and extend working time. 3. prevents the thread rusting, trip with perfect corrosion, high heat and abrasion resistant in many kinds of environments,repair the internal thread.
Product Description Material: glass-Soda Lime/ Borosilicate Size: 4.7625mm Certificate: ISO9001, ISO14001, TS16949 Profile H.R.T. produces Soda Lime glass balls and Borosilicate glass balls. Applications include check valves for chemical, pharmaceutical, food processing and fuel systems, and grinding media. Precision glass balls are available in matte, polished or ground finishes. Precision Glass Balls from H.R.T. have: High corrosion resistance Light weight (1/3 of stainless steel) Low coefficient of friction High dimensional stability Tight tolerances Non-magnetic Zero porosity Stable material cost Soda Lime Precision Glass Balls Characteristics Soda lime precision glass balls will not stand thermal shock; can mechanically give continual service at 230°F.; stands limited static and torque load; good electric and corrosion resistant properties. Density 2.4 gm/cm continuous operating temp. 230°F Continuous Operating Temperature 230°F Surface Finish Ground - 20-30 RMS Polished - 10-20 RMS Sizes 1/16 through 1" in ground, polish, or matte grades. Borosilicate Precision Glass Balls Characteristics Borosilicate glass balls withstand high thermal shock; can mechanically give continual service at 450°F with extreme temperature limit at 900°F; very high electrical resistivity and dielectric strength; high chemical stability, withstands high applied torque loads. Density 2.2 gm/cm Continuous Operating Temperature 450°F Surface Finish Ground - 20-30 RMS Polished - 10-20 RMS Sizes 1/16 through 1" in ground, polish, or matte grades.
General Description: OH4S is a switched Hall-Effect IC which is for contactless switching applications. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier that amplifies the Hall voltage, a schmitt trigger to provide switching hysteresis for noise rejection, and an open-collector output. Features 4.5V to 24V DC operation voltage Open-Collector pre-driver 25mA maximum sinking output current. Reverse Polarity Protection Applications Speed measurement Home appliances Position detection Flow measurement Absolute Maximum Ratings TA=25 Supply VoltageVCC··············4.5-24V Operating Temperature Range TA ··········-4085 Output Current IO···················25mA Storage Temperature RangeTS ················-55150
Product Description Material: glass-Soda Lime/ Borosilicate Size: 1.5mm-25.4mm Certificate: ISO9001, ISO14001, TS16949 Profile H.R.T. produces Soda Lime glass balls and Borosilicate glass balls. Applications include check valves for chemical, pharmaceutical, food processing and fuel systems, and grinding media. Precision glass balls are available in matte, polished or ground finishes. Precision Glass Balls from H.R.T. have: High corrosion resistance Light weight (1/3 of stainless steel) Low coefficient of friction High dimensional stability Tight tolerances Non-magnetic Zero porosity Stable material cost Soda Lime Precision Glass Balls Characteristics Soda lime precision glass balls will not stand thermal shock; can mechanically give continual service at 230°F.; stands limited static and torque load; good electric and corrosion resistant properties. Density 2.4 gm/cm continuous operating temp. 230°F Continuous Operating Temperature 230°F Surface Finish Ground - 20-30 RMS Polished - 10-20 RMS Sizes 1/16 through 1" in ground, polish, or matte grades. Borosilicate Precision Glass Balls Characteristics Borosilicate glass balls withstand high thermal shock; can mechanically give continual service at 450°F with extreme temperature limit at 900°F; very high electrical resistivity and dielectric strength; high chemical stability, withstands high applied torque loads. Density 2.2 gm/cm Continuous Operating Temperature 450°F Surface Finish Ground - 20-30 RMS Polished - 10-20 RMS Sizes 1/16 through 1" in ground, polish, or matte grades.
General Description: OH37 is a switched Hall-Effect IC which is for contactless switching applications. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier that amplifies the Hall voltage, a schmitt trigger to provide switching hysteresis for noise rejection, and an open-collector output. Features 4.5V to 24V DC operation voltage Open-Collector pre-driver 25mA maximum sinking output current. Reverse Polarity Protection Applications Speed measurement Home appliances Position detection Flow measurement Absolute Maximum Ratings TA=25 Supply VoltageVCC··············4.5-24V Operating Temperature Range TA ···········-4085 Output Current IO···················25mA Storage Temperature RangeTS ················-55150
Product Description Application areas: For crafts, accessories, household tools. Quality standards: No mold lines, without edges, smooth surface. Size: 2.0mm Plastic Balls Polyamide (Nylon) Balls PTFE (Polytetrafluoroethylene / Teflon) Balls Polypropylene Balls Polyethylene Balls Plastic balls are used in low load applications and flow control. Colored plastic balls are used for identification purposes, and in Many medical applications. Plastic balls offer excellent fatigue And corrosion resistance, impact strength and in many cases Natural lubricity. H.R.T. offers a complete line Of FDA-approved plastic balls in materials including nylon, Delrin and other engineered plastics.
Product name: Wireless DMX512 transmitter Product number:AMT-8041 Product features: 1. Transmitting/receiving standard DMX512 protocol data of console and the master-slaver on line signal of the same kind of lighting each other. 2. Single key to operate tricolor LED indicator. The LED indicator bright No DMX or wireless signal. Red LED flash Transmitting. Green LED flash Receiving 3. 126 frequencies band, FH design, and frequency-hopping synchronization automatically. 4. 7 groups ID code to set these different wireless nets without any interfere each other in the same place. 5 . Input voltage 9V~12VDC 500mA min. 3. Communication distance 500mvisible distance 4. Max transmitting power 20dBm 5. Receiver sensitive -94dBm 6. Signal socket 3/5pin male XLR.
it could enhance the connection strength and abrasion resistant, especially in AL, MG, Cast Iron and other low strength materials. 2.improve thread s stress state and to be spring connection, remove the errors of pitch and thread angle, protect the thread avoiding to be broken, and extend working time. 3. prevents the thread rusting, trip with perfect corrosion, high heat and abrasion resistant in many kinds of environments,repair the internal thread.
1.5mm-10mm Brass Ball Material: Brass Size: 1.5mm-10mm Grade: G100-G1000 Certificate: ISO9001, TS16949, ISO14001 Application: electric instruments, switch, valve and art work Profile Brass balls are used in electrical devices, petrochemical industry operations, and consumer products such as appliances. Small diameter brass balls are often used in valves. Electrical conductivity (and lower cost, compared to other corrosion-resistant balls) makes brass balls a good option for electronics applications. Brass balls have low friction properties. Corrosion Resistance Brass balls exhibit very good resistance to water, gas and oil, and chemicals including benzene, butane, methyl acetone and ethyl chloride. Hardness Rockwell B75-87 measured on parallel flats. Sizes Brass balls are manufactured in 3/64" to 5/8" in grades 100 through 1000