PTFE (Polytetrafluoroethene, Commonly known as " Non- Stick coating" Or " Easy to clean wok materials" ; Is a use of fluoride to replace all the hydrogen atoms of polyethylene synthetic polymer material. This material has acid- Fast alkali resistant characteristics of various organic solvents, Almost insoluble in all solvents. In addition, PTFE has a high temperature characteristics, And its extremely low coefficient of friction, It can be used for a lubricant while also become easy to clean wok and water pipes lining the ideal coating.
Features & Functions: Image sensor: Color CMOS OV 7949 Total pixels: 512 x 582 pixels Resolution: 420TVL Lens angle: 120 degree Mini lumination: 1. 0 Lux Technical specifications: Voltage: 9D to 15V DC Rated voltage: 12V DC Power cost: Maximum 1W Image sensor: 1/ 3- Inch color CMOS (OV7949) Total pixels (H x V): PAL: 628 x 586 NTSC: 510 x 496 Resolution: 420TVL (enhanced) View angle: 170 degrees Mini lumination: 2Lux(CMOS) Video output: 1. 0 Vpp composite video at 75 Ohms All trademarks are shown for reference purpose only. We are not authorized to sell any item bearing such trademarks.
Suction valve, For a linear reciprocating motion by the piston as well as before and after the movement corresponding to the open / Close operation, Inhalation of low- Pressure refrigerant; Valve plate, Connected with the suction valve, Valve plate including: Intake, For piston movement through the inhalation of low- Pressure refrigerant; Outfall for discharge through piston high- Pressure refrigerant; And the groove part, Which has a number of cavities, To around the suction or discharge port of the external; Discharge valve with the valve plate connected to before and after the campaign for the adoption of the piston and with the reciprocating motion of the corresponding open / Close operation, High- Pressure refrigerant emissions; And end caps, With the discharge valve connected to cover include: Suction tube, Set with the valve plate suction corresponding position; As well as the discharge pipes, Which is set with the discharge valve plate corresponds to the position. Cavity formed by a number of grooves can from the valve plate and the suction valve and discharge valve between the collisions that have relatively wide bandwidth and amplitude of vibration and noise to be attenuated.