align="left" Working pressure5-6BAR 5-6BAR 5-6BAR 5-6BAR Max Pressure8BAR 8BAR 8BAR 8BAR Air Consumption130L/MIN 130L/MIN 130L/MIN 130L/MIN Relative Capacity500G/MIN 500G/MIN 500G/MIN 500G/MIN Suitable For Drums16-20KG 20-30KG 50-60KG 180-220KGLength Suction Tube410MM 480MM 740MM 940MMDiameter32MM 32MM 32MM 32MM Air-operated pumps for dispensing all types of grease short and long distance, for greasing at high pressures. A wide range of models facilitates choice for application in kit for installation in centralized systems.62041 Air-operated grease pump ratio 50:1 for 12/20 kg trade drums62048 Air-operated grease pump ratio 50:1 for 20/30 kg trade drums62074 Air-operated grease pump ratio 50:1 for 50/60 kg trade drums Air-operated pumps for dispensing all types of grease short and long distance, for greasing at high pressures. A wide range of m 50:1 Air operated grease pumpBrand:FABITType:62041,62048,62074,62095Tecchnique Data Type 62041 620486207462095Compression Ratio50:1 50:1 50:1 50:1 Air Inlet Connection1/4 1/4 1/4 1/4 Grease Delivery Connection3/8 3/8 3/8 3/8 p
The transparent chamber allows the quantity and quality of the sucked oil to be controlled immediately. The oil must be hot OPERATING PRESSURE: 8-10BAR DEGREE OF VACUUM: NEGATIVE 0~-0.8BAR TANK CAPACITY: 70L TRANSPARENT CHAMBER CAPACITY: 10LWASTE LIQUID: ENGINE OIL AND GEAR OIL NET WEITGHT: 27KGS DIAMETER OF DIPSTICK PROBE: 1. Φ6*4*720mm (Cu ) (1pcs) flow rate 0.6L/Min 2. Φ6*4*900mm (PVC) (1pcs) flow rate 0.6L/Min 3. Φ8*6*720mm (PVC) (2pcs) flow rate 1.6L/Min 4. Φ8*6*720mm (Cu ) (1pcs) flow rate 1.6L/Min 1.OPERATING PRESSURE:8-10BAR 2.DEGREE OF VACUUM:NEGATIVE 0~-0.8BAR 3.TANK CAPACITY:70L WASTE LIQUID:ENGINE OIL AND GEAR OIL 3197 Air Operated Draining And Collecting Oil Machine(oil changer)The combination oil suction/ drainers are suitable for draining the engine oil from any motor vehicle by gravity, (with vehicles placed on auto lift or pit) and with probe.
Minimum measured amount Vmin [dm³] 5 Liquid operating temperature t [] -40 to +40 Ambient operating temperature TAmb [] -40 to +60 Maximum operating pressure Pmax [MPa] 1.8 Operating pressure P [MPa] 1.6 Testing pressure PN [MPa] 2.5 Measuring unit error (deviation of accuracy ) after correction factor of electronic calibration insertion δ [%] ±0.5 Nominal inner diameter [mm] DN25 Chamber capacity [cm³] 125 (theoretic ) Cyclic volume [dm³/1 rev. of the output shaft] 0.5 (theoretic) Sense of rotation of the output shaft when looking from the top to the right (clockwise)..... LPG flow meter(flowmeter, flow meter)LPG Flow meter is PISTON VOLUMETRIC FLOWMETER. LPG flow meter(flowmeter, flow meter) Maximum flowrate Qmax [dm³ . min¹] 60 Minimum flowrate Qmin [dm³ . min¹] 5
air-operated pump for grease,ratio 60:1 -nipples(connection) -gun with flexible/rigid delivery tube -delivery hose 1/4inch-6m Technique Date Article68260Tank capacity60kgLength delivery hose 6mGrease gun deliver tube40cmPump delivery 63048Compression ratio60:1Noise level81dBMax.working pressure8barMax.air consumption130it/minCapacity(free outlet 6 bar self-levelling grease at 20°c1000g/min 1)with 60kg tank,it is always ready for use and enables easy greasing at high pressure on any motor vehicle or machinery. 2)for 68260 Air grease pump 1.Air-operated grease pump.with 60kg wheel-mounted tank.it is always ready for use and enables easy greasing at high pressure on any motor vehicle or machinery.The seamless pressed tank offers maximum guarantee of adherence and functionality of follower plate. Air-operated grease pump equipped with -
1.Combination waste oil suction/drainer with transparent chamber wheel-mounted 90-litre tank equipped with level-gauge supplied with series of probes2.The Combination waste oil suction/drainer are suitable for draining the engine oil from any motor vehicle by gravity,(with vehicles placed on auto lift or pit)and with probe.3.The transparent chamber allows the quantity and quality of the sucked oil to be controlled immediately OPERATING PRESSURE: 80~115PSI (Extraction) 14~26 PSI (Ejection) WASTE LIQUID: ENGINE OIL VACUUM: 0 ~ -12PSI article 3197BTank capacity70LMax.draining capacity65Lchamber capacity8LBowl capacity10LDepressurizing pressure7barMoise level75dBSuction speed(with oil at 70-80,probes Φ6mm)0.6-1.6L/MinSuction hose 2mdraining hose 2mMax.discharge pressure0.5bar 1.The Combination waste oil suction/drainer are suitable for draining the engine oil from any motor vehicle by gravity 3197B Waste Oil Drainer
mechanical suspension part casted trailer suspension spring seat to fit square axle to fit York series type suspensions mechanical suspension part casted trailer suspension spring seat to fit square axle to fit York series type suspensions
(only XLU-4-wire series has this function) Rotproof plastic casing Protect grade IP67Patent transducer structure when small range levlemeter set up the flange, having no regust for the length of flange connection tubeSimple configuration parameters Without waiting for emptying containers or fill the need for additional remote control.Flexible setup Thread (flange) Fixed-(stent)Power Supply DC or AC XLU series offers this feature....... Ultrasonic level meter(ultrasonic level indicator, ultrasonic sensor) Ultrasonic level meter range: 8M 10M(ultrasonic level ind Ultrasonic level meter range: 8M 10M(ultrasonic level indicator, ultrasonic sensor) 2-Wire standard Max-range 30m 4-Wire standard Max-range 40m Solid level Max-range 25m. Min. resolution 1mm LCD/LED big display Intelligent signal processing technology With a Dual-Level Relay
3090B Waste Oil Drainer 1.The air-operated drainers air ideal for quick engine oil change(by means of suction) of any motor vehicle.2.The transparent chamber allows the quantity and quality of sucked oil to be checked immediately.3.Once depressurized,they work autonomously anywhere because they do not require continuous connection to the compressed air system.4.The oil must be hot. TECHNICAL DATA OPERATING PRESSURE: 8-10BAR DEGREE OF VACUUM: NEGATIVE 0~-0.8BAR TANK CAPACITY: 70L TRANSPARENT CHAMBER CAPACITY: 8L WASTE LIQUID: ENGINE OIL AND GEAR OIL NET WEITGHT: 27KGS DIAMETER OF DIPSTICK PROBE: 1. Φ6*4*720mm (Al ) (1pcs) flow rate 0.6L/Min 2. Φ6*4*900mm (PVC) (1pcs) flow rate 0.6L/Min 3. Φ8*6*720mm (PVC) (2pcs) flow rate 1.6L/Min 4. Φ8*6*720mm (Al ) (1pcs) flow rate 1.6L/Min oil changer: 1.Suction speed:0.6-1.6L/min 2.Discharge pressure: 1bar 3.Tank capacity: 70L 4.Operating pressure:8-10bar