gasket, SS316 flat gasket, carbon steel flat gasket, SS321 flat gasket. Metal flat gasket is mainly used in the joint part of high-temperature, high-pressure pipeline, tower, groove and heat exchanger.Metal flat gasket is suitable for steam industry.Metal flat gasket is also used in petroleum industry and petrochemistry.Main specification:Dimension:up to 1100mmPressure:20MPaTemperature:-200-650Least tighten pressure:70MPaPH:0-14Liquid:acid or alkaline liquid,steam
Synopsis:Ramie Packing with graphite & oil impregnation is mainly used for emulsion, water,oil,applicable to high pressure slurry pump of oil field, hydraulic support in coal mine and emulsion pump, etc.The former fabric-reinforced rubber ring has such disadvantages, such as short life span, frequent changing, and high strength of manpower, which not only blocks the production, influence economic benefits but also pollutes the environment seriously. After the application of Ramie Packing with graphite & oil, the life span was prolonged several months at least or over half a year at most.It doesnt pollute products. Ramie Packing with graphite & oil needs little maintenance,and high water based packing is easy to install and will not wear the sealing position.Main Specification:Temperature-40~+120Pressure10MPaPH Range5-10Linear Speed)15M/SSize3*3mm-60*60mmor as request
Automatic Plate Bevelling Machine, Plate Bevelling Machine, GBM-12C Automatic Plate Bevelling Machine GBM-12C Self-propelled Plate Bevelling Machine Features: chinacoal10 1. Use the high quality gear reducer and motor, and lower noise; 2. Complete the work automatically; 3. Bevel angle variety, can adjust between 25°to45°freely; 4. No decarburization phenomenon, can welding directly; 5. Install trolley to reduce the shake; 6. Max. single bevel width arrive 12mm, 18mm can be gotten by several times; 7. Processing speed bigger than 1.5m/min, and save the time greatly; 8. Totally automatic propel bevelling machine, low labor cost and intensity; 9. Export wooden packaging, regular transport to make machine intact.; 10.Independent research and development, low maintenance cost. Power supply:AC 380V / 220V 50Hz AC 480V / 240V 60Hz Power:1500W Motor Speed:1400r/min Bevel Speed:1.5m/min Max. Bevel m Single Bevel m Bevel Angle:25° ~ 45°(Adjustable) Plate Thickness:6-30mm Plate m Pipe Dia.:110mm Net Weight:175kg
SERRATED GASKET is Machined from solid metals in a variety of shapes. Serrated gasket are designed for high pressure, high temperature or highly corrosive applications by seiecting the most suitable material and shapes.Serrated gasket are made of many kinds of metal.There are SS304 Serrated gasket,SS304L serrated gasket,ss316 serrated gasket,ss316l serrated gasket,carbon steel serrated gasket,copper serrated gasket,tinplate serrated gasket,ect.Serrated gasket can be also made of some special type of marel. The metal of serrated gasket is base on the temperature,preesure and liquid.Main specification:Pressure:6.4-16.0MPaTemperature:650Least tighten pressure:70MPaCoefficient:m=4.25
Synopsis: Nomex Fiber Fibre Braided Packing is braided from high quality Dupont spun Nomex yarns with PTFE-Impregnation and lubricant additive. High cross-sectional density and structural strength, good sliding characteristic, gentle on shaft surfaces. Compared to Kevlar, it do not hurt shaft, also ideal for food industries. Application: A universal, wear-resistant packing that is nevertheless gentle to shaft surface. Designed specially for pumps, agitators, mixers, kneaders, refiners etc. Its excellently suitable for standardization in entire industrial sectors, e.g. pulp and paper, sugar production, breweries, sewage systems, water conditioning for power stations, for cooling water and abrasive river water, in turbine oil circuits, and other areas requiting a clean, and easy-to-install packing.Main specification:Temperature-100~+280Pressure25bar(revolving) 50bar(reciprocating) 100bar(flange) PH Range1-13Linear Speed20m/s(revolving) 2m/s(reciprocating) 2m/s(flange)Density 1.3g/cm3 Size3*3mm-60*60mmor as request
Electric Tube Beveling Machine, Inner Swell Electric Tube Beveling Machine,SDC-120T lectric Tube Beveling Machine chinacoal10 The Series of SDC Pipe Bevelling Machine adopts the Model T structure, introduce foreign advanced technical design, a decelerator is moderated through the planet, the awl gear wheel transmission of arc tooth, rising can make a reservation to enter the internal diameter of the tube automatically, Performance reaches Q/WAT01-2002 standard to require. Round knife plate, four tools are inserted and can be chosen wantonly; This beveler with simple structure, easy to operate, 220V alternating current power supply, light, benefit the work high above the ground. Sloping / facing bound: 13-330mm Chamfering thickness: 3-20 mm Rotating rate: 16rpm-58rpm Electric Pneumatic Working range (I.D.mm) Wall thickness (mm) Rotating rate (rpm) ISY-28T TCM-28T 16-28 15 58 ISY-80T TCM-80T 28-76 15 55 SDC-120T TCM-120T 38-90 15 42 SDC-150T TCM-150T 65-159 20 34 SDC-350T TCM-350T 150-330 20 16
Octagonal ring joint gasket is Machined from solid metals in a variety of shapes.Octagonal ring joint gasket are designed for high pressure, high temperature or highly corrosive applications.Octagonal ring joint gasket is made of the most suitable material and shapes.There are mainly Octagonal ring joint gasket made of 304/304L,Octagonal ring joint gasket made of 316/316L,Octagonal ring joint gasket made of carbon steel,Octagonal ring joint gasket made of soft iron,Octagonal ring joint gasket made of ss321,Octagonal ring joint gasket nickel,Octagonal ring joint gasket made of other suitable metal.
Synopsis:Kevlar fiber braided packing is made of Du Pont s Kevlar yarn.As the strength and module of Kevlar is as high as the steel-like strength.So kevlar fiber braided packing compared with other kinds of braided packing,kevlar fiber braided packing can resist more serve media and higher pressure. Kevlar fiber braided packing can be installed separately or as end rings with other kinds of packing to combine different characteristics into packing set.Kevlar fiber braided packing is mainly used as substitite of asbestos in pump systems. Property of Kevlar fiber braided packing is better than asbestors, and kevlar fiber braided packing covers all the services ranges which asbestos packing provided and more.Under very bad conditions where ordinary asbestos packing can not provided the satisfied effect. But kevlar fiber braided packing has long service. Kevlar fiber braided packing is usually applied to pulp factory, sand slurry,tin mine and feed water pump of power plant etc.Main specification:Temperature-100~+280Pressure8-25MPaPH Range2-12Linear Speed0-15M/SSize3*3mm-60*60mmor as request
Plate Beveling Machine, Automatic Plate Beveling Machine, YWM-12 Automatic Plate Beveling Machine Overview: chinacoal10 The YWM-12 is an outstanding machine, developed to optimise its performance, due to the accurate positioning of the plate during the cutting. With its own trolley it is easily transportable. Application: It is widely used in plate edge beveling in various metal welding preprocessing. Features: High quality transmission reducer with efficiency and stability. Shock absorption to move with fast beveling. Cold process with no oxidation Beveling width: 16mm once, Max is 22mm with several times Parameters: Motor 2.2kw/380V, 50/60Hz, Motor Speed 1450r/min Beveling Angle 25°to 45°adjustable Beveling Speed 1.5 to 2m/min Plate Thickness 6-30mm Plate Width 70mm Cutter Service Life 800-1000M for steel 500-600M for Stainless Weight 185kg Size 500mm*600mm*1100mm Working Noise 70 db
Ring joint gaskets are made by forging and heat treatment.Ring joint gaskets are used in oil and the flange, pressure vessels, high-speed joint face, such as high temperature and high pressure valve cover gasket sealed metal.In particular pressure, temperature fluctuations Of the occasion,Ring joint gaskets can still maintain good seal. R-type over ring joint gaskets are commonly divided into an oval or octagona type.R-ring gaskets are manufactured as API 6A and ASME B16.20-standard. The maximum pressure of Ring joint gaskets is up to 10000 PSI.In the flange of trapezoidal slot, octagona ring joint gaskets and ring joint gaskets are interchangeable. RX-type ring joint gaskets are applied to enhance the capability of R-ring gasket. BX-type ring joint gaskets are applied to 15000 PSI pressure system. There are many materials and apply to different forms of design and operational requirements, reference material characteristics table. Note: The material should be 15 ~ 20 HB lower than the hardness of flange surface.