Specification: 1).Product name: LED Daytime Running Lights(DRLs) 2).Model: ELNH005 3).Certificate Name: DRW Emark-4 4).Certificate No.: E4 87R 000011 5).Whole kits Consist: Two LED lamps kits (Left one and right one), wiring, one gift box, user manual 6). Lamp Consist: Electronic circuit board, viewfinder, wiring, lamp hull and housing; 7). Electronic circuit board: 5 high-power LED and Controlling gear 3.Major Technology Parameters: Rated Working voltage: DC 12V Rated Working current: DC 1.12A Rated Power consumption:13.44W Limb darkening current: DC 0.66A Limb darkening Power consumption: 7.92W 4.Maximum Technology Parameters: 1). Maximum working voltage: DC 24V, 1 minute only; 2).Over working voltage: DC 18V, 1 hour only; 3).Continuously working time 24hours: maximum current range±2mA 4).Maximum surface temperature:60Extraventricular temperature:20 5. LED bulb technology parameters: 1).Bulb Color temperature range: 6,000K-6,700K 2).Power: 1Weach LED bulb 3).Rated working current:300 mA 4).Current stablilty±2 mA (in 24 hours) 5).Brightness is between 70 to 90 LM
Size:190*45*30mm Certification: CE Warranty: 12 months Installation instruction of LED Daytime running light(DRLs-D03): 1. You will find three wires about the LED DRL, one is black, one is brown, another is grey. 2. For black wire, there are two connection methods: a.To connect with the ignition wire. The LED DRLs will work as soon as the car start; b.To connect with the fog lamp. It only begin to work when the fog lamp is turned on. It doesn t work yet even if the car start. 3. For brown wire, it can be only connected with earth wire. 4. For grey wire, it should be connected with low beam lamp. The LED DRLs will be at 100% on when the low beam lamp is off. But its brightness will be reduced to 70% when the low beam lamp is on.
Auto Daytime Running light, Auto DRL, DRL Light: Daytime running lamp ( DRL ) , is an automotive lighting ( For Automobile Safety) device on the front of a roadgoing motor vehicle, installed in pairs, automatically switched on when the vehicle is moving forward, emitting white, yellow, or amber light to increase the conspicuity of the vehicle during daylight conditions. 1. LED composition: Each LED light has the left light (L), right-light (R) , the two LED lamps were placed in two car grille below the headlights. 2. Lamps consists of: Each lamp from the circuit board, reflective bowl and light shell, lamp, cable composition. wwwstartwayautocom 3. Circuit board: Each LED circuit board containing five high-power light-emitting diodes and complete electronic control components. Auto Daytime Running Lights parameter: 1. Rated Voltage: DC 12V 2. Rated the total operating current: DC 1. 12A 3. Rated total power consumption: 13. 44W 4. Dimmer total current: DC 0. 66A 5. Dimmer total power consumption: 7. 92W 6. Maximum working voltage: DC 24V lasted 1 minute 7. Excess working voltage: DC 18V lasted 1 hour and 8. Continuous working time 24 hours, during which the maximum current fluctuations ± 2mA 9. The maximum surface temperature (shell) 60 ° C (ambient temperature at 20 ° C) 10. Color Temperature: 6000-6700K 11. Brightness: Between the 70-90LM (strict symmetry for two sides)
Auto Daytime Running light, Auto DRL, DRL Light: Daytime running lamp ( DRL ) , is an automotive lighting ( For Automobile Safety) device on the front of a roadgoing motor vehicle, installed in pairs, automatically switched on when the vehicle is moving forward, emitting white, yellow, or amber light to increase the conspicuity of the vehicle during daylight conditions. 1. LED composition: Each LED light has the left light (L), right-light (R) , the two LED lamps were placed in two car grille below the headlights. 2. Lamps consists of: Each lamp from the circuit board, reflective bowl and light shell, lamp, cable composition. wwwstartwayautocom 3. Circuit board: Each LED circuit board containing five high-power light-emitting diodes and complete electronic control components. Auto Daytime Running Lights parameter: 1. Rated Voltage: DC 12V 2. Rated the total operating current: DC 1. 12A 3. Rated total power consumption: 13. 44W 4. Dimmer total current: DC 0. 66A 5. Dimmer total power consumption: 7. 92W 6. Maximum working voltage: DC 24V lasted 1 minute 7. Excess working voltage: DC 18V lasted 1 hour and 8. Continuous working time 24 hours, during which the maximum current fluctuations ± 2mA 9. The maximum surface temperature (shell) 60 ° C (ambient temperature at 20 ° C) 10. Color Temperature: 6000-6700K 11. Brightness: Between the 70-90LM (strict symmetry for two sides)
Specification: 1).Certificate Name & No.: DRW Emark-4; E4 87R 000011 2).Whole kits Consist: Two LED lamps kits, wiring, one gift box, user manual 3). Lamp Consist: Electronic circuit board, viewfinder, wiring, lamp hull and housing; 4). Electronic circuit board: 5 high-power LED and Controlling gear 5). Clear glass with five long-lifespan; Super and glare-free LED per lamp; The flat slimline enclosure profile allows mounting on narrow places in the front bumper and the area. Major Technology Parameters: Rated Working Voltage: DC 12V; Rated Working Current: DC 1.12A; Rated Power Consumption:13.44W; Limb Darkening Current: DC 0.66A; Limb Darkening Power Consumption: 7.92W; LED Color Temperature Range: 6,000K-6,700K Our DRLs has fashionable appearance which is derived from occident; We adopted exquisite Germanic techniques for high quality. Our DRLs is with RDW Emark-4 certificate; No pollution, no noises, no electronic interferer are its advantages. They are especially effective in preventing daytime head-on and front-corner collisions by increasing vehicle conspicuity and making it easier to detect approaching vehicles from farther away.
Specification: 1).Certificate Name & No.: DRW Emark-4; E4 87R 000011 2).Whole kits Consist: Two LED lamps kits, wiring, one gift box, user manual 3). Lamp Consist: Electronic circuit board, viewfinder, wiring, lamp hull and housing; 4). Electronic circuit board: 5 high-power LED and Controlling gear 5). Clear glass with five long-lifespan; Super and glare-free LED per lamp; The flat slimline enclosure profile allows mounting on narrow places in the front bumper and the area. Major Technology Parameters: Rated Working Voltage: DC 12V; Rated Working Current: DC 1.12A; Rated Power Consumption:13.44W; Limb Darkening Current: DC 0.66A; Limb Darkening Power Consumption: 7.92W; LED Color Temperature Range: 6,000K-6,700K Our DRLs has fashionable appearance which is derived from occident; We adopted exquisite Germanic techniques for high quality. Our DRLs is with RDW Emark-4 certificate; No pollution, no noises, no electronic interferer are its advantages. They are especially effective in preventing daytime head-on and front-corner collisions by increasing vehicle conspicuity and making it easier to detect approaching vehicles from farther away.
Specification: 1).Certificate Name & No.: DRW Emark-4; E4 87R 000011 2).Whole kits Consist: Two LED lamps kits, wiring, one gift box, user manual 3). Lamp Consist: Electronic circuit board, viewfinder, wiring, lamp hull and housing; 4). Electronic circuit board: 5 high-power LED and Controlling gear 5). Clear glass with five long-lifespan; Super and glare-free LED per lamp; The flat slimline enclosure profile allows mounting on narrow places in the front bumper and the area. Major Technology Parameters: Rated Working Voltage: DC 12V; Rated Working Current: DC 1.12A; Rated Power Consumption:13.44W; Limb Darkening Current: DC 0.66A; Limb Darkening Power Consumption: 7.92W; LED Color Temperature Range: 6,000K-6,700K Our DRLs has fashionable appearance which is derived from occident; We adopted exquisite Germanic techniques for high quality. Our DRLs is with RDW Emark-4 certificate; No pollution, no noises, no electronic interferer are its advantages. They are especially effective in preventing daytime head-on and front-corner collisions by increasing vehicle conspicuity and making it easier to detect approaching vehicles from farther away.