rubber air spring SGS and ISO9001:2000 certified. Rubber air springs, such as Sleeve air springs, Single/Double air spring We are the leading suppliers of high quality air spring system to the transport industry, having particular emphasis on cost effective engineering, design and test, manufacture and supply of truck and trailer air suspension, lift axle suspensions and components to suit the OEM manufactures in our region. The production technique is considered the best in China, and our products are considered the standard by the Ministry of Light Industry Ministry. Products H series Air spring: BELLOWS : Wall gauge is approximately 5 mm. GIRDLE HOOP: Wire wound type shown, molded into the bellows. BEAD RING: upper and lower. countersunk steel type shown. May also be of a second stamped steel variety or made of aluminum. AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts. BOLT: M10 x 45 mm Used for mounting the part. MOUNTING PLATE: The plates must be strong enough and backed by structural members to prevent bowing of the forces or loads involved J series Air spring: BLIND NUT: M8 x 15 (two or four per each plate depending on part size). Used for mounting the part. MOUNTING PLATE: The plates must be strong enough and backed by structural members to prevent bowing (of the forces or loads involved AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts K series Air spring: BLIND NUT: M8 x 15 (two or four per each plate depending on part size). Used for mounting the part. MOUNTING PLATE: The plates must be strong enough and backed by structural members to prevent bowing (of the forces or loads involved. AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts. ZF series Air spring BLIND NUT: M8 x 15 (two or four per each plate depending on part size). Used for mounting the part. MOUNTING PLATE: The plates must be strong enough and backed by structural members to prevent bowing (of the forces or loads involved. AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts. CY series Air spring BLIND NUT: M8 x 15 (two or four per each plate depending on part size). Used for mounting the part. AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts.
NO Max compression value OD Mass (kg) rated frequency hz 715N 145 265 1.9 1.25 We can offer quotations after having your inquiry. We will quote you as soon as possible. Welcome to inquiry us freely with your any requirements, we will try our best to meet your all kinds of requests with our good products and competitive price under sincerity and trust.
rubber air spring SGS and ISO9001:2000 certified. Rubber air springs, such as Sleeve air springs, Single/Double air spring We are the leading suppliers of high quality air spring system to the transport industry, having particular emphasis on cost effective engineering, design and test, manufacture and supply of truck and trailer air suspension, lift axle suspensions and components to suit the OEM manufactures in our region. The production technique is considered the best in China, and our products are considered the standard by the Ministry of Light Industry Ministry. Products H series Air spring: BELLOWS : Wall gauge is approximately 5 mm. GIRDLE HOOP: Wire wound type shown, molded into the bellows. BEAD RING: upper and lower. countersunk steel type shown. May also be of a second stamped steel variety or made of aluminum. AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts. BOLT: M10 x 45 mm Used for mounting the part. MOUNTING PLATE: The plates must be strong enough and backed by structural members to prevent bowing of the forces or loads involved J series Air spring: BLIND NUT: M8 x 15 (two or four per each plate depending on part size). Used for mounting the part. MOUNTING PLATE: The plates must be strong enough and backed by structural members to prevent bowing (of the forces or loads involved AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts K series Air spring: BLIND NUT: M8 x 15 (two or four per each plate depending on part size). Used for mounting the part. MOUNTING PLATE: The plates must be strong enough and backed by structural members to prevent bowing (of the forces or loads involved. AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts. ZF series Air spring BLIND NUT: M8 x 15 (two or four per each plate depending on part size). Used for mounting the part. MOUNTING PLATE: The plates must be strong enough and backed by structural members to prevent bowing (of the forces or loads involved. AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts. CY series Air spring BLIND NUT: M8 x 15 (two or four per each plate depending on part size). Used for mounting the part. AIR INLET: 1/4BSP parallel is standard. 3/4BSP parallel is also available for most parts.
NO Max compression value OD Mass (kg) rated frequency hz 662N 135 300 2.5 1.05 We can offer quotations after having your inquiry. We will quote you as soon as possible. Welcome to inquiry us freely with your any requirements, we will try our best to meet your all kinds of requests with our good products and competitive price under sincerity and trust.
We, as the largets air spring manufacturer in China, supplies more than 300 items applicable to trucks, trailers, buses, commercial cars and so on. And we have exported to lots of countries over the world with premium quality and competitive price.
Air spring We do and export air spring in China as a factory. Our worshop also do other auto parts. As soon as you give us the drawing or sample of the part you need, We will return you an exact favorable price and satisfaction. If you are interested in our air spring, Please tell me. I am willing to send you catalogues and quotes.