Features:
Can be connection to dynamic strain amplifier and static strain amplifier and collect data
It is waterproof and suitble for test in outdoors and in the field
It is small in size and suitable for analog test in house

Mail Technology Parameters:
Measurement Range: 0.1MPa5MPa
Sensitivity:0.05
Size:28*9 17*8
Wire Connection: inputoutput:ACBD
Impedence: 350

Storage:
When open the package, please check the QTY whether is in accordance with QTY listed in delviery note
Test the earth pressure cell by strain instrument and see whether it works normally
Put it in humidity80% environment,there shouldn't be corrosive gases and be dry and aeration.
Be carefull when carry it

Installation:
It should be covered at point of pressure changes and used to monitor soil pressure of interface.   The separation distance in horizontal of earth pressure cells is 3 times than cell separation0.6m),speration distance in horizontal and speration distance in vertical is same.Load side of earth pressure cell should face to soil mass to be measured.When cover it,soil mass near load side of earth pressure cell should be flattening,covered soil should be same as soil around it,but,please get rid of stones,Be carefull to cover and tamp
solidly, layer-by-layer.