|
Interface latest version, works for both Citreon and Peugeot |
diagnostic scanner for comprehensive Citroen and Peugeot cars
diagnostic.
You can do all as a authorized dealer does.This diagnostics
software allows
you to perform complete diagnostics of all from 1995 on.
Diagnostics is
performed via OBD-II connector (which is located near steering wheel) or via
manufacturer-specifi
c connector (only older cars, pre-2001).
|
|
functions |
other universal car scanner tools which only read fault codes,
this software
performs nearly ALL the functions like the original dealer
diagnostic tool. Our
diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE
J1850 bus (both PWM and VPW). |
|
following diagnostic functions are supported |
|
identification |
complete identification of control unit, e.g. part number,
software/hardware
version, manufacturer, etc... |
|
fault codes |
all stored and pending fault codes with complete description
(e.g. "Rail pressure
- too low pressure"). |
|
supports report printing or copy to clipboard. |
|
fault codes |
function clears all stored fault codes and other diagnostic
information. |
|
(complete car scan/test) |
all ECUs (electronic control units) installed in car and reads all
diagnostic fault codes. |
|
Values |
displays live Data like Engine Speed, Battery voltage,
Oxygen Sensor, Coolant
Temperature, etc. Values can be displayed in graph,
9 values at once, or full
listing (all measured values). Logging to file is also supported,
which allows
offline analysis. |
|
test |
test activates particular actuator (e.g. turn on fuel pump, lock/unlock
wheel,
lock/unlock doors, cut off fuel, etc..) |
|
functions/Adaptation |
feature is of great importance in all vehicles because systems like
Engine c
ontrol units, Immobilizers, Airbags, Alarms, Body Control Units,
and some
others, require you to perform reset or programming procedures
after car
repair is done, or even configuration after replacing broken 8.
Control Unit |
|
and software requirements |
requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM,
50MB free
HDD space and USB 1.1 port (USB 2.0 recommended) and
Microsoft Windows
98 SR2/2000/XP with the latest service pack installed. |
|
customer requires, we can prepare ready to work PC. |
|
includes |
|
x Main unit with extension OBD2 cable |
|
x Long 9pin to USB cable |
|
x Short 9pin to USB cable |
|
x OBD2 cable |
|
x 16pin to Clip cable |
|
x Instruction for Installation and Activation DVD for PP2000 |
|
Includes |
|
|
|
|