Fiat Key Maker

Applicationt: 

OBD

Production Description:

Product nameFiat Key Maker
Item
Details
Features:
No needed PC only this device, uses new or unlocked 48 chips, being able to read 93LC66 data without programmer;
It has a 9v battery so no outer supply needed;
It supports FIAT`s SIENA and PALIO that use megamos crypto 48 chips,
no need Pin Code, no need programming in car.
Once written in, vehicle can be started. 48 chips will not be locked after writing in.
 
How to make the key:
1 Remove BSI PC from the car, the BSI PC is in the left side of the driver, with the insurance seat for one seat.Need to remove the whole insurance box, and take out the BSI PC from the back of the insurance box,then weld 93LC66
 2 After remove 93LC66 clear all the feet of 93LC66 insert 93LC66 to the adapter of this programmer as the following picture, then connect the adapter to the programmer.check below:
3 Switch on the LED turn red then trun green, which mean the programmer selt-test is normal.
4 Choose Button 1 or Button 2 to program keys? If the led light twinkle one time and the loudspeaker loud one tim, it shows that the programming is success.If LED lighting 5 times,and loudspeaker loud 5 times, it shows the wrong 93LC66 data or couldn't find the 93LC66, need to check it is wrong with the connection or placement of the feet of 93LC66, and program keys again;If LED lighting 10 times, loudspeaker louding 10 times,it shows the ID48 chip is locked or the type of chip is wrong, need to program again.
5 Weld 93LC66 after finish the programming, and install BSI back to the car then it could be started.