Product Attribute:
Material: PE
Weight :0.2kg
Applicationt:
Ford
Production Description:
NEW ELM327 USB modified FTDI FT232RL+25K80 chip HS/MS CAN OBD Scanner
Support FORD models open hidden function Focus Mondeo Kuga
MS-CAN support via the switch (MS-CAN/HS-CAN)
Constant speed set to 500 kbit
ELM327 USB has full support to Ford specific diagnostic protocol MS-CAN.
Majority of modern Ford modules are accessible only through this protocol.
Support FORD models open hidden function
Cured added functionality for Ford, this device works as normal OBD2 / EOBD code reader on all supported vehicles.
Firmware Version: 1.5
Functions:
* Read / erase fault codes from ALL modules, including OBD2 / EOBD
* Access modules on both HS-CAN and MS-CAN mode
* Read vehicle configuration
* Actuator tests
* Live Data
* Injector coding
* Software updates
* Service procedures
* Force DPF
* Programming
* Coding
* Adaptations
Supported software:
ELMconfig
Forscan
FOCCCUS
FF2
ELM327 USB OBD2 you will be able to:
Read and clear diagnostic trouble codes
Air Flow Rate
Display and read
Engine RPM
Vehicle Speed
Intake Air Temperature
Long Term Fuel Trim
Short Term Fuel Trim
Timing Advance
Oxygen Sensors
Fuel System status
And so much more!
Our ELM327 USB OBD2 scanner is compatible with FORD, MAZDA, BMW, VW, GM, AUDI, CHEVY, TOYOTA,, LEXUS, MERCEDES, HYUNDAI, KIA, MITSUBISHI, NISSAN, SUZUKI, JAGUAR, LAND ROVER, CHRYSLER, HONDA AND SO MUCH MORE!
OBD2 protocols:
SAE J1850 PWM (41.6Kbaud)
SAE J1850 VPW (10.4Kbaud)
ISO9141-2 (5 baud init, 10.4Kbaud)
ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
ISO14230-4 KWP (fast init, 10.4 Kbaud)
ISO15765-4 CAN (11bit ID, 500 Kbaud)
ISO15765-4 CAN (29bit ID, 500 Kbaud)
ISO15765-4 CAN (11bit ID, 250 Kbaud)
ISO15765-4 CAN (29bit ID, 250 Kbaud)
SAE J1939 CAN (29bit ID, 250 * Kbaud)
CAN (11 * bit ID, 125 * Kbaud)
CAN (11 * bit ID, 50 * Kbaud)