Product Attribute:
Material:Aluminium,0,0,Stainless Steel,0,Stainless Steel
G.W:0.6kg
Color:Red
Applicationt:
Ford, Mazda
Production Description:
1. Functions
FVDI J2534 is a vehicle communication interface device that full compatible with SAE J2534-1 and partly compatible with SAE J2534-2. It supports most of vehicle communication protocols and can be used as PassThru device for many dealer level diagnostic software. And it can be used as a ELM327 device also, support most of ELM327 software.
2. Highlights
a) High speed host communication. (3M bps)
b) Stable host communication. (with RTS/CTS flow control)
c) Automatically register software and no virtual machine needed.
d) Online software update and keep software latest always.
e) Online firmware update.
f) USB/802.11 selectable host communication.
g) Support ELM327 software by one device.
3.Comparison with other devices
For Ford/for Mazda IDS
4. Technical specifications
a) Voltage & Current requirements
8~32VDC, 100 mA (max), 0.6 Watts @ 12 VDC
Note: protected against reverse battery polarity
b) Vehicle Protocols
ISO9141
ISO14230
J1850 VPW
J1850 PWM(Ford SCP)
ISO11898 HS(500K BPS)
ISO11898 MS(125K BPS)
ISO15765 HS(500K BPS)
ISO15765 MS(125K BPS)
FEPS(Flash EEPROM Program Signal)
forHonda SCS
forHonda DIAGH
KWP1281
J2819(TP2.0)
c) Supported software for J2534
for Ford IDS V110
for Mazda IDS V108
d) Supported software for ELM327
ELMconfig
Forscan
FOCCCUS
FF2
e) Vehicle Connection
Molded DLC3(OBDII-16)
f) Dimensions
H:22mm (0.87in) W:54mm (2.13in) L:76mm (2.99in)
g) Weight 50g (1.76oz)
h) Environmental Operating: -20ºC to 45ºC (-4ºF to 113ºF) at 15% to 85% RH
non-condensing
LED: Work normal: Green LED blinks continuously slowly
Firmware updating: Red LED blinks continuously quickly
PS Push Switch:
Pressed: works as ELM327 mode
Released: works as J2534 mode
Installtion Guide
PS:When you open FVDI J2534 for ford software after installtion, an error window will pop out. That means you have not connect your device with your computer;Connect your device with computer,and the FVDI J2534 software will be opened normally.
Note: Cannot open the IDS software on the desktop directly,it is recommmended to delete the
IDS software shortcut on the des