Product Attribute:
color:black red yellow blue
rubber:FKM NBR
Applicationt:
for all gasket
Production Description:
Metal composite materials series |
|
Nitrile Rubber / NBR / FKM / FPM, Coating Dope Material For Metal Gasket & Brake Anti-Noise Shim, Supporting Roller/Spray Coating, Partial Coating
HT-100 FKM roller/Spray coating dope
Performance characteristics:
Ø high temperature resistance, weather resistance, resistance to hot water and steam
Ø good elasticity, good sealing effect, small compression permanent deformation
Ø oil resistant, acid and alkali resistance and a variety of chemicals
Ø and HT-103adhesive with good adhesion, coating on metal
Application:
Metal gasket for automobile, motorcycle
|
Item |
|
Characteristic |
|
Before vulcanization |
Component |
|
HT-100 |
HT-100B |
|
Appearance |
|
Black viscous fluid |
Light yellow or red transparent liquid |
|
solid content |
% |
26±2 |
|
Mixing ratio |
|
100:5.5 (proportion by weight) |
|
After vulcanization |
working temperature |
|
-30~250 |
|
Adhesion |
Level |
1 |
|
Impact resistance |
kg/cm |
50 |
|
Flexibility |
Mm |
1 |
Method of use
1. metal surface degreasing,derusting,sandblasting,passivation or oxidation treatment,dry cleaning surface of the metal, then is coated with HT-103 adhesion, put aside natural air drying or drying in an oven.
2. HT-100 and HT-100B are mixed according to the ratio of 100:5.5, can be sprayed or roller coating. At operation process can be adding butyl acetate as diluent, or reduce air bubbles.
3. the spraying or roller coating materials with good natural dried into the oven curing
HT-200 NBR roller/Spray coating dope
Performance characteristics:
Ø working at -30 ~ 150
Ø good elasticity, good sealing effect, small compression permanent deformation
Ø oil resistant, acid and alkali resistance and a variety of chemicals
Ø Recyclable use
Application:
Metal gasket for automobile, motorcycle
|
Item |
|
Data |
|
Before vulcanization |
Appearance |
|
Black viscous fluid |
|
solid content |
% |
28±2 |
|
After vulcanization |
working temperature |
|
-30~150 |
|
Adhesion |
Level |
1 |
|
Impact resistance |
Kg/cm |
50 |
|
Flexibility |
Mm |
1 |
Method of use
1. metal surface degreasing,derusting,sandblasting,passivation or oxidation treatment,dry cleaning surface of the metal, then is coated with HT-205 adhesion, put aside natural air drying or drying in an oven
2. HT-200 and HT-200B are mixed according to the ratio of 100: 46, can be sprayed or roller coating. At operation process can be adding butyl acetate as diluent, or reduce air bubbles.
3. The spraying or roller coating materials with good natural dried into the oven curing
Rubber Coated Metal Material
It is a new kind sealing material that on one side or both sides of the metal surface coated with a thin, strong solid rubber, vulcanized together. The material can provide excellent performance of high-temperature resistance and durability, with a very low compression ratio. Compared with the conventional non-metallic sealing material, it has a relatively long service life, Therefore, It was generally used in harsh environmental condition of extra pressure and ultra-temperature sealing requirement.
Material Application:
Cylinder head Gasket, Gearbox Front Oil Seal, Gearbox Bank Rear Oil Seal, Intake or Exhaust Manifold Gasket, Water Pump Gasket, Noise-damping Gasket, Buffer Strike Gasket, Automotive Air Conditioning Gasket, Air Compressor Gasket.
Metal Core and Rubber Type Options:
The metal core of RCM Material has different options according to gasket application as following:
-
Rubber Type: FKM, NBR, Foamed Rubber
-
Metal TypeStainless steel(SUS 201, 301, 304, AISI 301), Cold Roll Steel(SPCC or SAE), Aluminum.
Product Catalog
1. Rubber Coated Metal and Rubber Coatings Materials for Gasket2
1.1. Rubber/ Metal Composite Materials Series2
1.1.1. HT-100 FKM Rubber Coatings Dope for Gasket2
1.1.2. HT-103 FKM/Metal Adhesion Dope. 3
1.1.3. HT-109 FKM Free Primer Screen-Paint(Partial Coating) Dope for Gasket4
1.1.4. HT-200 NBR Rubber Coatings Dope for Gasket5
1.1.5. HT-205 NBR/ Metal Adhesion Dope. 6
1.1.6. NBR/FKM Rubber coated Metal7
1.2. Silicon Rubber Materials Series10
1.2.1. HT-18 Gasket Surface Anti-Stick Coatings Dope(Rubber)10
1.2.2. HT-191 Gasket Surface Anti-Stick Coatings Dope (Colophony)12
1.2.3. HT-68 Gasket Screen-Paint ((Partial Coating) Dope (Rubber)14
2. Asbestos-free material for gasket and sealing. 16
2.1. Product Overview.. 16
2.1.1. Compressed Asbestos-free Product Series17