Product Attribute:
Certification:ROHS
Size:160*75*28mm
G.W:430g
Voltage:12v
Output Power:12Vw
Color:White and Gold
Certificate:CE
Applicationt:
95% cars.
Production Description:
Multi-functional Jump Starter 12000mAh [ used in Iphone, Ipad, Ipod, PC, PSP and so on]
Multi-functional Jump Starter
Item No: SD-01
1.Product parameters:
|
Size:
|
160*75*28mm
|
|
Weight:
|
350g
|
|
Output:
|
5V/2A; --- Mobile phone, Tablet PC, PSP, MP3/MP4.
12V/2A; --- Car refrigerator, blast pump, etc.
19V/3.5A; --- Laptop PC
Jump start;--- 12V vehicle
LED light --- (light, burst flashing, SOS)
|
|
Input:
|
12V/2A
|
|
Starting Current:
|
200A
|
|
Peak Current:
|
400A
|
|
Operating temperature :
|
0°C ~ 60°C
|
.Instructions for use:
1, Select the appropriate voltage and connector for the electronic device to charge / power supply
2, Press the switch to start charging when your device connected with EPOWER; If you unplug the cable, auto-sleep will start in one minute.
3, Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged
4, During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty whenall LED lights start to flash
5, Press the switch three seconds to start If you want to use LED for illumination and select the status ( light, burst flashing, SOS, close) by pressing the switch to transform.
6, Store the product in a cool and dry place and away direct sunlight.
4.Jump start 12V vehicle Instruction:
1. Make sure that the number of indicators is not less than 3 ones.
2. Connect the RED clamp to the vehicle's battery positive (+) terminal and connect the BALCK clamp to the vehicle's battery negative (-) terminal.
3. Plug the cord of jumper cable into the jump start socket.
4. Start the vehicle.
5. When the vehicle is started, remove the jumper cable from EPOWER and disconnect RED and BALCK clamps to the vehicle battery.
6. Leave the vehicle's engine running.
5.Product Highlights: