Applicationt:
Benz, BMW, VW & AUDI
Production Description:
MST-V3D WHEEL ALIGNMENT
Features:
1. Reference 3D virtual plane for measuring the vehicle, faster and more accurate.
2. Accuracy calculates the entire vehicle angle by two high precision cameras.
3. Machine in the factory with valid calibration and it is not necessary to perform calibration at the customer site.
4. Four standard targets, no electornic compents and no malfunction like the CCD sensors.
5. Roll the vehicle to complete the compensation, quickly to get the measurement data in two minutes.
6. Auto compensation with special clamps and no need to roll the vehicle.
7. Functions of the Track Width, Wheelbase, Tire Diameter, Caster Trail, etc.
8. Free from the influence of ambient light and temperature, stable and reliable.
9. The samera bar tracks four targets automatically, more convenient and widespread measurement in less time.
Technical data:
Measuring Item |
Accuracy |
Measuring Range |
|
Display Accuracy |
1/0.01°/0.1mm |
|
|
Camber |
±2 |
±10° |
|
King-pin |
±6 |
±20° |
|
Wheel Toe |
±6 |
±20° |
|
Set Back |
±2 |
±5° |
|
Thrust angle |
±2 |
±5° |
|
Gauge |
±2mm |
1800mm |
|
Spread of axies |
±2mm |
3200mm |
KBS BRAKE STABILIZER
For improving brake efficiency
Innovative technology by improving brake fluid quality!
To improve your driving more safety!
1.Improving hydraulic brake system efficiency
2.Minimize brake distance up to 12% under emergency
3.Patented technology of EMF comb filtering
4.No modification to vehicle, no violation to warranty
5.Test approved by GTU, Germany
6. Even more improvement in normal braking condition.
KBS is suitable for all passenger cars
It can be applied at all type of car and has nothing to do with the hardware of its brake system, KBS distantly works on brake fluid only. KBS may not violate manufacturers warranty as it does not modify the OE design nor change the system at all, while some other brake system modification of might violate it.
Position for installing KBS
It does not matter the position since its fixed at metal tube of brake fluid, but to fix it behind the engine fire wall would be recommended for its lower temperature enviranment. You will normally find fire wall is in between engine compartment and windshield, metal brake tubes are underneath the plastic cover.