Diesel Oil Flash Point Tester, Flash Point Tester for Fuel Oil

Applicationt: 

It is applicable to all petroleum products with flash points above 79℃ and below 400℃ except fuel oils.

Production Description:

I.Summary This instrument is designed and made as per GB/T3536-2008 Petroleum Products - Determination of Flash and Fire Points - Cleveland open cup method and ASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester. It is applicable to all petroleum products with flash points above 79℃ and below 400℃ except fuel oils. II. Main Technical Features v This instrument adopts LCD screen to display and full English man-machine interface. It can preset expected flash point temperature, sample mark number, barometric pressure and other parameters.It has menu prompt and input guide. v It adopts simulation tracking to display the function curve of temperature rising and test time. It has the functions of English mis-operation prompt,test date,test time and other parameters. v Automatically calibrate the effect of atmospheric pressure to test and calculate the corrected value. v Differential coefficient detection.Automatically correct the system deviation. v Automatically open the lid,detect the flash point and print test data.The test arm automatically rise up and lower down. v Beautiful design,safe and convenient to operate. III. Main Technical Specifications v Power supply:AC220(-10%~+5%)V, 50Hz v Temperature measurement:Range:room temperature~400℃ v Repeatability:≤8℃ v Reproducibility:≤17℃ v Accuracy:0.1℃ v Heating rate:Correspond with GB/T3536 and ASTM D92 v Ignition mode:Electric ignition. Gas flame diameter is 3.2mm~4.8mm v Ambient temperature:(10~40)℃ v Relative humidity:≤80% v Maximum power consumption:400W Dimension:410mm*360mm*310mm