This item includes:
-
3PCS Nema 34 stepper motor with 740oz.in(Bipolar)
-
3PCS Stepper motor driver D2HB882MB, 8.2A,16micsteps
-
1 PC Power Supply 350W-24V
-
1 PC Breakout Board
Detailed Information:
1.Hybrid Stepper motor-Nema 34( shaft size is 12mm)
Model |
Step angel ( ° ) |
Motor Length L(mm) |
Rate Voltage
(V) |
Rate Current (A) |
Phase Resistance ( ) |
Phase Inductance (mH) |
Holding Torque (oz.in) |
Lead Wire (NO.) |
Rotor Inertia
(kg. c?) |
Motor Weight (kg) |
|
34HD9416-30B2 |
1.8 |
97 |
6.27 |
1.65 |
3.8 |
24 |
740 |
4 |
2.2 |
2.9 |
Note: We can produce dual shaft motors. If you want to order dual shaft motor, please tell me the diameter of the behind shaft , for example , the length of it and whether it has the keyway. Dimensions:
2. Stepper motor driver-D2HB882MB
The D2HB882MB is an economical microstepping driver based on patented technology of Longs Motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique ,it can output more speed and torque from the same motor,compared with traditional drivers ,such as L/R drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple,therefore less motor heating is achieved.
?Low cost and good high-speed torque |
?14 selectable resolutions |
|
?Supply voltage up to +80VD |
?Suitable for-2-phase and 4-phase motors |
|
?Output current up to 8.2A |
?Dip switch current setting 8different values |
|
?Optically isolated input signals |
?Pulse frequency up to 200KHz |
|
?Automatic idle-current reductiOn |
?Small size (107*97*48),Weight:1KG |
3. Power SupplyThe power is 350 watts, and the output voltage is 24VDC. 4. Breakout BoardDescription:
Built in DB25 male connector.
DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
DB25 Input Pin: P10,P11,P12,P13,P15.
DB25 GND Pin: P18-P25.
Power supply: +5V DC.
Built in C-class Optical-coupler.
High quality with Surface-mount Tech.
Whats more, our products are mainly used in CNC machine, Carver machine, Automazation, Printer, Stage lighting and so on. If you have any questions about our products, please dont hesitate to contact me. And I will try my best to support you. |